Jump to content
SAU Community

Recommended Posts

Hey guys, little while ago there was a post where someone sourced some oil filter with the nut welded on top of the filter. Tried searching for it but couldn't find the post. Anyone know anything about them or been using it? Just curious cus i've runned out of oem oil filters and wanna to give them a go. Thinking would make it easier as i don't have a relocation kit.

Link to comment
https://www.sau.com.au/forums/topic/218678-oil-filter-with-nut-on-top/
Share on other sites

autobarn sell a 'drift' branded oil filter with nut on it.. its blue! cost 20 odd busk though ouch :)
You're on to it mate, that's the one URAS is recommending,hey what's $20 bucks for the features this filter has especially the ease of getting it off.

I would still recommend screwing these filters on by hand as normal if you can,and only using the nut for removal as if you use a spanner to do them up they will get powerful tight,you know when you put on a fresh filter and tighten it up that you can back it off easily if you want to straight away, but try it in a week and you know how hard they get,just my 2c worth Cheers Grey Pearl.

If a filter is done up to the right torque settings, you shouldn't need tools to remove it.

Every single car I have purchased in the last 5 yrs has had some spanner in the workshop try to tighten the neck of the friggin filter, resulting in squashing and possible damage to the rubber seal, and making it damn near impossible to get the filter off after the heat has helped it to stick.

All cars (including my GTR) had a screwdriver help me to convince the filter to let go and give up, but after that, hand tight has been more than enough to make a strong seal with the filter and make it possible to get off by hand only.

B.

My hand and filter removal tool doesnt fit down there in a bnr32 :P

yeah exactly my problem

I believe this is the topic you are refering to

http://www.skylinesaustralia.com/forums/Sw...bl-t204892.html

That's the one, thanks for that cooper. Looks like it hasn't been updated. Has anyone been using these?

You do them up about hand tight, but dont use anything else to do them up. I have heard stories of engines who have been destroyed because the oil filter was over tightened, something broke off and blocked off the flow. Do it as tight as you can by hand, but you will need a tool to get it off. If it is loose, it will leak oil

LoL at some of the suggestions.

Filter removal tools are just that.. for removal; u never use a tool to tighten a filter.

Remove filter, clean o-ring seat, lubricate new filters o-ring, tight by hand with moderate amount of force - done.

there are some orange filters out there that have the end you grip designed with a grip like paint on them to help you remove them ;)

Your talking about the Fram Grip, I think.

gallery_14713_1542_24561.jpg

In that famous oil filtration test done years ago, Fram didn't come up that well considering the cost.

Edited by GeeTR

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...