Jump to content
SAU Community

Recommended Posts

Hi,

Has anyone had problems with their fuel gauge/fuel tank? My fuel gauge was working fine but recently it varies wildly from 3/4 full to full. Also I cannot fill the tank more than about 3/4 full and there seems to be an air lock or something - even after shaking the car during filling, I can't fill the tank. Any clues?

Link to comment
https://www.sau.com.au/forums/topic/218733-problems-with-fuel-gauge/
Share on other sites

Is it a mere faulty in-tank gauge signal reading or do you actually can only put less litres of petrol in your tank when refilling?

Both; I can't completely fill the tank and the fuel gauge moves from full to 3/4 full

Both; I can't completely fill the tank and the fuel gauge moves from full to 3/4 full

hey John,

Go as close to empty as possible and then fill up and see how many litres go in.

It does sound like a faulty guage, and i know that the fuel gauges/sensors in our cars and 350z are nothing short of crap.

I've filled up to the point where it just about overflows out, and the guage shows half a quarter to go. I can also be at half tank and within 5k's it shows close to a quarter left :P

LOL - i thought nissan should have fixed them (fuel gauge sensor) 10 years after the R33....

I think my gauge is stuffed as well I have some sort of air lock in the tank as the maximum I can put in is about 55 litres. Any clues on how to fix it???

  • 1 year later...
I think my gauge is stuffed as well I have some sort of air lock in the tank as the maximum I can put in is about 55 litres. Any clues on how to fix it???

I fixed the fuel gauge problem and it was easy. All you have to do is clean the sliding connections on the 2 fuel floats.

Take out the rear seat, expose the both openings to the 2 floats, withdraw the left float but just lift the right to expose the contacts and get a cotton bud to clean the sliding connections on both the floats. They don't seem dirty when you first see them but when you run the cotton bud over them you get a black oxide on the bud which is affecting the fuel gauge reading. Only takes about half hour.

I fixed the fuel gauge problem and it was easy. All you have to do is clean the sliding connections on the 2 fuel floats.

Take out the rear seat, expose the both openings to the 2 floats, withdraw the left float but just lift the right to expose the contacts and get a cotton bud to clean the sliding connections on both the floats. They don't seem dirty when you first see them but when you run the cotton bud over them you get a black oxide on the bud which is affecting the fuel gauge reading. Only takes about half hour.

Pics would be good.

  • Thanks 1
Hi Mate,

I've also had this problem where I can only fill up to about 3/4 full. I can only ever fill up around 40L max.

Also petrol gauge is all over the shop. Decides to move whenever she pleases.

That is exactly what mine was doing and now it seems to be stable and accurate. When I cleaned the connections today I noticed that the tank was half full of fuel when the gauge indicated that it was nearly empty. I have only taken it for a short drive and it seems accurate now and doesn't go all over the place; I will have to wait and see if it is permanent but the US forums seem to think that this is a good fix.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...