Jump to content
SAU Community

Recommended Posts

Item: Tomei Reytek programable ECU with map sensor

Age: 1-2 yrs

Condition: Perfect

Price: $800 ono

To Fit: (What car) R32 GTR

Location: Brisbane

Contact: PM or 0422382292

Comments:

This is a fully programable ECU which uses a map sensor to eliminate afm's like the D-jetro PFC. Im basically selling it as I couldnt find anyone at the time to tune it in Brisbane. I know that Unique Autosports in NSW sell and tune them, and some DR Drift (cant remember name)in Vic and a place in perth but could be more that do now. You can buy the tuning software and iterface kit from tomei for them too.

I pulled it out of my car which had it installed in the Tomei workshop in Japan along with other things. The car was running around 310awkw (mercury motorsports dyno)with T04R turbo (17psi), tomei 260 cams, upgraded pump and still with standard injectors. Car ran 11.5@126mph with that setup and was getting 500kms per tank of fuel. I have since upgraded many things and swapped for a PFC d-jetro cos no one tunes it in Brissie otherwise I would have kept it!

Unique autosports sell them for $1900 exchange---> http://www.uniqueautosports.com/ (look in the tomei section)

for more info ----> http://www.tomei-p.co.jp/_2003web-catalogu...dex-reytec.html

OTHER THINGS FOR SALE:

One set of R32 GTR injectors with fuel rail and nismo adjustable regulator. Was running 310awkw safely which led me to believe they might be highflowed but not sure?? Might need new buckets which can be bought from an injector place for a few dollars or less. Were running fine and pulled off for bigger items.

$400 for the lot. Will not separate

One GReddy 60mm black face mechanical boost guage. In perfect condition and working fine. Was in car when bought a replaced for a Defi guage. Just needs vacuum line to work.

$100

Chrome catch can which I bought a while ago. Still new in box with all parts required.

$30

RB26 cam gear front cover and stock cam gears in good condition

$75

RB26 oil breather U pipe between cam covers in perfect condition

$20

RB26 clutch pack fan. Was in good working order and not slipping. I have grinded a little off the edge off the blades as seen in pics to clear the radiator I put in. I went to thermos as the shroud couldnt be used. The grinding hasnt done anything to performance of fan.

$30

If interested either reply, PM or call me on 0422382292. Will post interstate at buyers cost. Prices are neg.

Cheers,

Glenn

post-4200-1210563831_thumb.jpg

post-4200-1210563848_thumb.jpg

post-4200-1210563876_thumb.jpg

post-4200-1210563896_thumb.jpg

post-4200-1210563915_thumb.jpg

post-4200-1210564074_thumb.jpg

post-4200-1210564167_thumb.jpg

post-4200-1210564263_thumb.jpg

post-4200-1210564337_thumb.jpg

Edited by 06tst

price drop on Tomei Reytek ---> $700 ono. I need this gone asap!

It is a great ecu and fully tunable. If you are in Sydney and looking for a cheaper option programable ECU this is it. Unique Autosports deal with them in the western suburbs (seven hills) of sydney and can tune them.

Also Melbourne people, DR DRIFT can tune them aswell. He is also in western suburbs at Brooklyn.

price drop on Tomei Reytek ---> $700 ono. I need this gone asap!

It is a great ecu and fully tunable. If you are in Sydney and looking for a cheaper option programable ECU this is it. Unique Autosports deal with them in the western suburbs (seven hills) of sydney and can tune them.

Also Melbourne people, DR DRIFT can tune them aswell. He is also in western suburbs at Brooklyn.

i can tune thenm also, whats your best price?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...