Jump to content
SAU Community

Recommended Posts

don't listen to him..

yes you can replace with just one.

you'll need to make some sort of adapter up though.

I'll buy your shitty stock ones for $50.

that should be enough to have a custom, shiny metal adapter plate for your single atmo bov.

I would imagine just fitting one and blocking the other off as if you wanted to do the flutter it would work. I haven't actually seen the piping of the GTR and thought about it to really say.

Edit: Just realised there was no point to this post. :P

Edited by adam-__-

You can do that no worries, but remember its one pipe going into two bov's. Not two pipes, so all the air will just be fed to the one bov. You usually put two on as a better attempt to vent all the air. Putting one atmo bov on will just make it work harder and possibly not vent enough air so the excess would be sent back to the turbo charger and you would experience the flutter noise.

thanks for the info guys. I dont want to change the bovs by choice its just that i have bought a hard pipe kit for my gtr and the pipeing kit does not have provisions for the bov's to be plumbed back so my standard bov's are venting to the atmosphere at the moment and i think this is why i have poor idel and boost response takes a little longer to come on

thanks for the info guys. I dont want to change the bovs by choice its just that i have bought a hard pipe kit for my gtr and the pipeing kit does not have provisions for the bov's to be plumbed back so my standard bov's are venting to the atmosphere at the moment and i think this is why i have poor idel and boost response takes a little longer to come on

Id say your problem is more likely attributed to the fact you're venting to atmo, not that your using stock BOV to do so.

IE stock or aftermarket, without a retune your still going to have the same problem

GTR stock BOV's are better in every way than almost every aftermarket BOV I have ever tried. It's a 99.9% guarantee that it won't matter what BOV you use, you will still have the same problem.

Cheers

Gary

if your car still uses AFM, then they have to be plumbed back in.

the factory ones do not stay shut at idle.

so essentially, you have an air leak.

un-metered air entering your engine.

a:f mixture is screwed and you get idle/stalling issues etc.

If you are still running air-flow meters, you need to plumb the BOVs back to make the car run properly. no ifs, no buts.

If you have MAP fuelling, feel free to go nuts with BOVs that vent to atmosphere.

there are people who have atmo venting bovs on AFM equipt GTR's with no problems.

but there is always some tuning to help it.

I'm not sure of the exact parameter that needs to be adjusted but it would have something to do with overrun fueling or throttle closed fueling or something that describes what the ecu does when throttle is shut.

basically, you want to remove fuel at that point so that when the atmo bov vents the air out of the system, then the ecu doesn't inject the fuel it was going to, that would have mixed with the air that was vented.

  • 4 weeks later...

My GTR came over with twin atmo Blitz BOVs, no major issues - just runs a lil rich between gear changes, but I would of kept the stockers if I had a chance.

btw the newer hks ssqv for gtr comes with the adapter/replacement pipe to suit single atmo bov.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, when one "money pit" is never enough Noice, and excellent work mate
    • I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • I hear that would involve some nice country road drives into the hills for Mark...
    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
×
×
  • Create New...