Jump to content
SAU Community

Recommended Posts

I've bought these ANZ 17'' multi 4 stud rims(4x100 and 4x114.3), they were on a Civic.

But I'm just wondering if it will fit my car (96 R33 GTS).

The rims are 215/45. And I've read it somewhere that the "lug size" might be different between a Honda and a Skyline, so will they fit? And can I use my current nuts for these rims?

post-40415-1210853604_thumb.jpg

Edited by Charles89
Link to comment
https://www.sau.com.au/forums/topic/219391-help-will-these-rims-fit-my-gts/
Share on other sites

hahaha thats precious.

dont buy wheels before you know they will fit.

4x114.3 is correct for a non turbo however, lug size has nothing to do with the wheels.

only thing of concern is offset and width - 215/45 only relates to the tyre, not the rim.

I have got R32 GTR's which are 9 iches without any problems.. but its a 32.. could there be that much diff?

BTW... need offsets to confirm..

If your talking about the r32 gtr wheels in your pics, they are actually 16x8 +20something (cant remember the offset)

The lower the offset the further away from the brakes/hub it will sit.

If your talking about the r32 gtr wheels in your pics, they are actually 16x8 +20something (cant remember the offset)

+30

Somone was saying that 7 inch front and back was the widest you could go..

So I figure that the I figure that the 33 should be able to run just as wide rims as a 32.. considering r33 GTR rims are 8's too I dont see the problem with running 8's.. thats what i was refering too..

Can we get what model civic? Because I know some civics run ~+40 offset (in which case they will be sweet as and will sit the same as stock wheels).. unless the previous owner bought a set of rims with retarded offsets..

Edited by GTS4WD
+30

Somone was saying that 7 inch front and back was the widest you could go..

So I figure that the I figure that the 33 should be able to run just as wide rims as a 32.. considering r33 GTR rims are 8's too I dont see the problem with running 8's.. thats what i was refering too..

Can we get what model civic? Because I know some civics run ~+40 offset (in which case they will be sweet as and will sit the same as stock wheels).. unless the previous owner bought a set of rims with retarded offsets..

just so you know r32 GTR Rims are 16x8 +30 R33 Gtr Rims are 17x9 +30 and R34 Gtr Rims are 18x9+30.

dont buy them, 215 wide tyres are ghey, and with a rim width of only 7" you wont be able to fit much bigger later on.

keep searching, plenty on nice rims out there

EDIT: just realised you already bought them, OOPS...

Edited by R34GTFOUR
just so you know r32 GTR Rims are 16x8 +30 R33 Gtr Rims are 17x9 +30 and R34 Gtr Rims are 18x9+30.

only one in this thread that is making any sense!

Those rims off the civic will look terrible, sunken fitments FOR THE LOSS!

If you have an R33 then you will need something with more of a negative offset for it to look any good! R33's have massive guards you will need rims at least 8" wide (+30 offset) or 9" (+35 offset)

Edited by Hawker180
Somone was saying that 7 inch front and back was the widest you could go..

Umm NO.

I've run 9 up front and 10's on the rear on my 32 gtst with no problems. Depends on the offset, the wider the wheel, the lower the offset needs to be.

knowing the offset is vital, stock R33 wheels are 16x6.5 +45ish, being 17x7's i wouldnt recommend going any higher than +45, my guess is those wheels are between +38 and +42 so should be fine. as mentioned GTS's have small little 2-pot calipers which are easy as piss to clear, so chances are the wheel will clear them fine.

pretty simply though, fit them and find out, put them on, push them hard against the mounting surface and make sure theres no obvious fouling, tighten 2 nuts up, spin the wheel around by hand, watch for it clearing the caliper, watch for it clearing the upper control arm at the front, at the rear look out for the tie rod end for the HICAS (shouldnt be an issue for these wheels), then turn the front wheels lock to lock and check for rubbing. if this is all good drop the car and turn the wheels lock to lock and slowly drive back and forth, get someone to stay close to the wheel wells and listen for any rubbing.

I got them fitted yesterday, it fits fine, no probs or what so ever.

and to be honest, i really don't care what people think, if its crap or looks gay.

coz at the end of the day, its my car and i like it with them on :)

heres a pic, its a little blurry:

post-40415-1211360405_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
    • Could be correct. Meter might be that far out. Compare against a known 5 ohm 1% resistor.
    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap.  (edit: I went out and did it right now, the line I had chosen did appear to have no vacuum on it, it used to go to the front of the intake, I've now completely blocked that one off at the bracket that holds several vacuum lines by the firewall.  I T'd into the vacuum line that goes from that bracket to the vacuum pump at the front of the car, but no change in the MAP readings).  Using the new vacuum line that has obvious vacuum on the hose, im still only getting readings between -6.0 and -5.2.  I'm wondering why the ECU was detecting -5.3 when nothing was connected to the MAP nipple and ECU MAP selected as the source. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
×
×
  • Create New...