Jump to content
SAU Community

Recommended Posts

hey guys,

i'm taking the car to the mech tomorrow morning. but just need some ideas quick

Took off to go to work bout 6pm, car is still warm as i only got home at 5.30pm, so no need to warm up the car

come out of my driveway, probably hitting 3000rpm ish, car goes POOOOP, i was like wtf. Then power starts cutting out(lights start dimming and going bright again), eventually the car stablises, idles at 1000rpm, then alll of a sudden the revs build up slowly.....from 1000rpm to 5000rpm. so i turn off the car

so i opened the bonnet to make sure my accelerator cable wasn't caught. everything looks fine.

turn the car on, car revs slowly up to 4000rpm again~!!!

then i turn it off, stepped on the throttle again.

and turned the car on again, this time it idled properly. at 800rpm ish.

so i put the car back in the garage, and go to work as i'm alrdy late.

come back 4hrs later

turn on the car, idles properly, so i tried to back it out. i reversed about 5metres, car starts acting weird again. i let it idle, and it idles hell rough with revs jumping up and down ( 800-1000rpm). and the car sounds like a rex

so i wait for 2 mins with he car on, then the car idles and sounds normal again.

tried to take it for a drive. the car feels hell weird, no power at all. so i tried to slowly boost it..but NO boost at 4000rpm..wtf..i can hear the turbo spinning making a weird sound...

then the car starts losing power again. it struggles to idles. then stallls...wtf

i can still turn the car on, but idles hell weird. doesnt have power at all and doesnt make any boost

so any suggestions? please, i need to know whats wrong lol. or i cant sleep tonight

coilpack? turbo? cylinder?

and btw lately when i take off slowly i can hear a very light 'hummming' noise from the engine, but never took notice of it

i also have a vented bonnet. but it's only vented on top of the radiator. so i assume it has nothing to do with it as water only goes to the radiator

so any suggestions plz/??

cheers

steve

sorry bout the long post, and it probably doesnt make sense.

Link to comment
https://www.sau.com.au/forums/topic/219402-wtf-my-cars-fked/
Share on other sites

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

I had a air line come off the front of my motor, ran like shit , almost like on 5 cylinders.

Just go through everything around the engine, also you might have a dud Injector, been there....

I am around the corner, so If you wanted too I could come by and have a look....

Bit late now.

Mike

Hey Mike, which 'reputable' imports workshop is closest to innaloo? i wanna drive the car there instead of towing it

the one i usually used is like 20km's away so i dunno wanna drive that far

I looked on the 'The Consolidated Workshop Thread' and closest is 'Speedworks' in osborne park. but never heard of them

hmm, still sounds like a pipe has come loose, have had this happen to me a few times in silvia/skyline, exact same issue was due to a pipe coming off turbo, may look like it's on but.. air still may be escaping, doesn't take much when it comes to compressed air :spank:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...