Jump to content
SAU Community

Recommended Posts

hey guys,

i'm taking the car to the mech tomorrow morning. but just need some ideas quick

Took off to go to work bout 6pm, car is still warm as i only got home at 5.30pm, so no need to warm up the car

come out of my driveway, probably hitting 3000rpm ish, car goes POOOOP, i was like wtf. Then power starts cutting out(lights start dimming and going bright again), eventually the car stablises, idles at 1000rpm, then alll of a sudden the revs build up slowly.....from 1000rpm to 5000rpm. so i turn off the car

so i opened the bonnet to make sure my accelerator cable wasn't caught. everything looks fine.

turn the car on, car revs slowly up to 4000rpm again~!!!

then i turn it off, stepped on the throttle again.

and turned the car on again, this time it idled properly. at 800rpm ish.

so i put the car back in the garage, and go to work as i'm alrdy late.

come back 4hrs later

turn on the car, idles properly, so i tried to back it out. i reversed about 5metres, car starts acting weird again. i let it idle, and it idles hell rough with revs jumping up and down ( 800-1000rpm). and the car sounds like a rex

so i wait for 2 mins with he car on, then the car idles and sounds normal again.

tried to take it for a drive. the car feels hell weird, no power at all. so i tried to slowly boost it..but NO boost at 4000rpm..wtf..i can hear the turbo spinning making a weird sound...

then the car starts losing power again. it struggles to idles. then stallls...wtf

i can still turn the car on, but idles hell weird. doesnt have power at all and doesnt make any boost

so any suggestions? please, i need to know whats wrong lol. or i cant sleep tonight

coilpack? turbo? cylinder?

and btw lately when i take off slowly i can hear a very light 'hummming' noise from the engine, but never took notice of it

i also have a vented bonnet. but it's only vented on top of the radiator. so i assume it has nothing to do with it as water only goes to the radiator

so any suggestions plz/??

cheers

steve

sorry bout the long post, and it probably doesnt make sense.

Link to comment
https://www.sau.com.au/forums/topic/219402-wtf-my-cars-fked/
Share on other sites

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

I had a air line come off the front of my motor, ran like shit , almost like on 5 cylinders.

Just go through everything around the engine, also you might have a dud Injector, been there....

I am around the corner, so If you wanted too I could come by and have a look....

Bit late now.

Mike

Hey Mike, which 'reputable' imports workshop is closest to innaloo? i wanna drive the car there instead of towing it

the one i usually used is like 20km's away so i dunno wanna drive that far

I looked on the 'The Consolidated Workshop Thread' and closest is 'Speedworks' in osborne park. but never heard of them

hmm, still sounds like a pipe has come loose, have had this happen to me a few times in silvia/skyline, exact same issue was due to a pipe coming off turbo, may look like it's on but.. air still may be escaping, doesn't take much when it comes to compressed air :spank:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Its also worth mentioning that 30 years after it left the factory and god knows how many missed oil changes since, there is every possibility that one or more lifters are ticking because they are sticky/gummed up. To resolve that you need to pull the cams then pull each lifter, disassemble, clean, reassemble, soak in oil and re-install, and they should come up good as new.
    • What air filter are you running? Is it a panel filter in the stock air box, or a pod filter? Is the air filter the type that is oiled?   If you unplug the IACV, what rpm does the engine idle at?
    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
×
×
  • Create New...