Jump to content
SAU Community

Recommended Posts

I'm putting all these rumors to rest.....;

****************************************************

R33 GTST 1993, Manual

THIS CLUTCH WILL ONLY FIT AN OLDER TYPE SKYLINE WITH THE PULL TYPE CLUTCH ON YOUR SLAVE CYLINDER.

****************************************************

Now theres seems to a bit of confusion going on from the last posts about clutches.

Back in May my clutch went....I researched around and sourced a new clutch.

The clutch is rated at 1500kg, heavy Duty Daiken NISSAN PATROL CLUTCH.

This clutch is interchangable with my Skyline and is half the price nearly.

Different name on the box but its the same shit only different price.

The clutch was worth $300.00 from SLACKS CREEK BRAKE AND CLUTCH (See Geoff)

GAVIN WOOD installed the clutch and through out bearing & oil for $290

The feel of the clutch pedal is great. The position of the clutch pedal is great.........just like a new clutch is supposed to behave.

When I drive it hard it doesnt slip or do anything stupid.

I can drop the pedal at 3 g's and the back wheels light up pretty quick.

I highly recommend it if you have a mild to standard liner.

AND Its not 1.2 cm or 0.004mm off the floor !- Come on guys.

Any further poblems or questions u can email me; swordfish19792002 @yahoo.com.au

  • Replies 87
  • Created
  • Last Reply

Top Posters In This Topic

Very interesting! A couple of questions though - (1) When did Skylines go from the pull to push type clutch? (2) What is the standard clamping pressure of the normal factory clutch? (3) Can any Nissan dealer get these in for around that price?

JimX,

(1) When did Skylines go from the pull to push type clutch?

>>> I think 1995 onwards....double check with Gavin Woods, labrador QLD first.

(2) What is the standard clamping pressure of the normal factory clutch?

>>> standard is 650-700kg

(3) Can any Nissan dealer get these in for around that price?

>>> Yes they can I think they were more expensiver of hand than Slacks Creek Brake & Clutch.

I tried Nissan on the Gold Coast and I think they were $55 more or something....Can't remember though.

Put get the part number first before u start ringin for prices.

swordfish u mean ur skyline has a push clutch dont u ? early mods have push late mods have pull my r33 gtr has pull ( the slave cil pushes to engine so it pulls the clutch away from it hence the name pull ) .

by the way all old cars had push and most late mod cars have pull

got my clutch done on tuesday;

been taking a bit of getting used to as its fully engaged about an inch of the floor;

liking it though, feels way quicker, perhaps the old clutch was slipping more than i though;

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...