Jump to content
SAU Community

Recommended Posts

DAM straight its good to go to a dinner that i havnt organised :D

yeah ... dinner sounds chilled be good to meet everyone properly.. and if damo's there im there! havnt seen ya in a while bud!

**edit** oh and only if thats chilled with you steve.... considering ur my driver and all ;)

just woke up... man my sleeping habbits are bad... damo when u haveing a bbq and a team of muppets fit your intercooler.. seems i was not clever enuf hahaha

He will be there :bunny:

funny its Halfway between Adelaide and Pt Adelaide :(

Where is the Halfway Hotel? cos i am stupid and i dont know :(
  • Replies 473
  • Created
  • Last Reply

Top Posters In This Topic

lol sure there was a cruise somehwhere in this thread. To answer stuff from 4 pages i missed lol, kye, as flick said you and lauren shall be at mine after DA, and you better be at DA, cant remember last time you guys came to drifts.

On the chick talk, its good to have a gf as into cars as you are, they then understand the passion and why your willing to go into so much debt for them, right flick ;)

And it seems we will see come next drift school how well flick can handle a car, so will find out then how well she can drive/slide my baby :bunny:

haha yeah i dont remember the last time i was at drifts either :( the more i watch it the more it makes me want to get another drift car haha

might make it to DA, not to sure. i want to go but ive been trying to save and its not going to well :D

will be at yours though for sure!

Edited by Import S13

can i too have a PM about meet spot...

it looks like i might be out for tea as well.... thats right Madaz, not only will i be lanning with SAU people this weekend, i'll be going for a dinner and cruise!!!!! OMG!!!! what has the world come to??? =)

so is the halfway hotel half way between town and bay or town and hills??

why do they call it the halfway???

and kell i never said i will be there. hahah

dont get hopes up

and steve GOLD pictures espec, the cat and cookie one.

:woot::P:):D:starwars:

:whoops::whoops::whoops::whoops::whoops:

I just booked the HALFWAY hotel for 20 people and SATURDAY night at 6pm it is under Skylines Australia just incase im late, which i probably will as per usual lol

well i will most likely see you at the meet spot kellz

Well most people are indecisive on if they are coming or not thats why i booked for 20 so if people decide on the night that they want to come then there will be room :P

see im a smart little princess :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...