Jump to content
SAU Community

S1 R33 Gtst Manual

boostbits
 Share

Recommended Posts

boostbits Enthusiast

boostbits

Posted
Posted

Make: 1994 S1 R33

Model: GTST

Milage: 127,000

Transmission: Manual

Colour: Matt black

Location: Melbourne, Vic

RWC supplied? NO

Currently registered? Has been previously registered but currently no rego

Price: $5500 ONO

Contact: Blake 0423 030 032

Mods: Front mount, Lowered, Turbo Timer, LED tailights, 3 Inch Cat back, Aftermarket Front bar, Deep Dish steering wheel

Hi Guys,

It's time to get rid of one of my cars as I am about to move house and can't take the R33 with me.

Was going to get this one back on the road as a daily driver/occasional track car (has never been taken on a track yet).

Overall good condition but needs a bit of TLC as it has some damage on the left hand side, a new door and a fix up on the rear quarter panel will solve this one.

Tires on car are currently unroadworthy as I sold the rims I had and bought some crappy standrard rims and tires from a wrecker.

Apart from that a few more little things need a tidy up and you have yourself a nice daily or could be used as a pure track car.

I will also throw in a new S/S radiator and 3 inch front pipe.

Car is able to be viewed in Frankston either email or ring the number above for more details.

I need this car gone asap so obviously open to offers but nothing stupid!

See photos below

Thanks,

Blake

sky2.jpg

sky1.jpg

sky3.jpg

sky4.jpg

sky5.jpg

sky6.jpg

Link to comment
https://www.sau.com.au/forums/topic/219687-s1-r33-gtst-manual/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...