Jump to content
SAU Community

Recommended Posts

i had a look around and see a lot of oil forums but one on the N/A section and though i need to hear how everyones oil are going in there cars because there isnt anything new on engine oils here.

i brought Red line 10w40 high performance, all synthetic oil

apparently this does wonders

brought it for the new engine going in with about 50000km on it

spent $121 on 4.7liters because the bottles are in gallons (PFFH) haha

whats eveyone elses view on these top oils like royal purple and bla bla elf and yeh all that?

and what are hopeless fake oils?? :D

cheers, Andrew

Link to comment
https://www.sau.com.au/forums/topic/220328-engine-oils/
Share on other sites

well im ing Nulon 10-40 fully synthetic and im glad i used it..... i won 5 litres last year at extreme horsepower for winning the 6 cylinder naturally aspirated dyno class.

i had heaps of people tell me not to use fully synthetic in a non turbo...but she has due for an oil change back in feb i think it was, and the oil is still see through now, starting to get a little bit dark. however if i had been using the :"normal" oil it would be as black as black by now and id probably be thinking of doing another oil chnge before it gets to the stage where it is so thin that it makes my oil pressure drop.

but yeah thats my 2 cents on what i use, im really happy with it and the car loves it......so im gonna keep using it :D

Link to comment
https://www.sau.com.au/forums/topic/220328-engine-oils/#findComment-3885617
Share on other sites

i had heaps of people tell me not to use fully synthetic in a non turbo...

that's generally based on a cost benefit factor. turbo's should use synthetic because they are sometimes oil cooled and the heat to cool cycle degrades the oil faster.

to the OP: that said it depends on your application. if you are cruising around a semi synthetic (dare i say natural) will be fine provided you keep using the same oil for your subsequent services. if you do a bit of dyno or track work like cara, myself and a few others then synthetic would be the way to go!!

royal purple, elf, motul, take your pick.

personally i run motul

Link to comment
https://www.sau.com.au/forums/topic/220328-engine-oils/#findComment-3885635
Share on other sites

well im ing Nulon 10-40 fully synthetic and im glad i used it..... i won 5 litres last year at extreme horsepower for winning the 6 cylinder naturally aspirated dyno class.

i had heaps of people tell me not to use fully synthetic in a non turbo...but she has due for an oil change back in feb i think it was, and the oil is still see through now, starting to get a little bit dark. however if i had been using the :"normal" oil it would be as black as black by now and id probably be thinking of doing another oil chnge before it gets to the stage where it is so thin that it makes my oil pressure drop.

but yeah thats my 2 cents on what i use, im really happy with it and the car loves it......so im gonna keep using it :P

O ok i saw the nulon at the shop yesterday and it would have been my 2nd choice :)

i picked redline because lots of turbos are using it and i was thinking being N/A it will be like giving it a treat and the best thing for it, the guy at burson said i should use fully synthetic for the engines life now because mineral mixtures wont do the job after fully synthetics????

yeh reading the label it last for 30,000km and can oil a jet turbine so im expecting my pistions to be 100% ;) haha

i also heard the RB30de/t

jets blocked oil gallery's a lot so the oils there would be a fair bit of a important thinggg ???

anyways off to work now

cheers, Andrew :rofl:

Link to comment
https://www.sau.com.au/forums/topic/220328-engine-oils/#findComment-3886787
Share on other sites

dunno i last used 20w 50 penrite in my 30e its done near 286,000 doesnt miss a beat... yeah its thick but thinner oil seems to make it run crap... i dunno why i last used 10w something didnt like it so im back to 20w 50 usualy use penrite or castrol both companys been round long enough

Link to comment
https://www.sau.com.au/forums/topic/220328-engine-oils/#findComment-3887992
Share on other sites

personally i would use redline products for my transmission fluids.

regardless NAs won't be as fussy with oil as the turbo models... just make sure you find some nice quality one and don't mix and match. service them regularly and you should have no problems.

always keep in mind that these are 13-15 year old cars and yet we drive them like they had just come off the show room floor

Link to comment
https://www.sau.com.au/forums/topic/220328-engine-oils/#findComment-3888014
Share on other sites

i use Nulon 15w-50 street and track high performance in the excel

usually about $50 for 5L - i only need 3.3L so i use 2 bottles for 3 oil changes

works well - oil is nicer colour after more and more oil changes as its cleaning more and more crap out...

i dont burn as much oil as i used when i was on Penrite15

something semi-synthetic/synthetic 5w-30 to 15w-50 should be fine for a n/a skyline

Fuchs Titan Super GTO

Nulon High Tech Fast Flowing

Nulon Street and Track High Performance

Castrol EDGE Sport 5w-30 or 10w-60

Castrol GTX3

Penrite HPR15 or HPR10

Penrite Sin10 or Sin15

Motul 4100 Turbolight

Motul 300V Power

Elf Competition GT 15w-50 or 10w-30

Elf Super Sporti XP 15w-40

thats all i can think of atm....

it also depends on the age of the engine - older, then a slightly heavier oil, newer, then a thinner oil

Edited by 342Four
Link to comment
https://www.sau.com.au/forums/topic/220328-engine-oils/#findComment-3888126
Share on other sites

hmm thats the next oil for me for my manual gear box

apparently its 3.8 liters

but with the whole GTS4 thing i looked and there are about 3 topics on it in transmissions and they are all totaly different

does anyone know what type of gear box i have? simple GTS one? and any stats on it if its not the simple GTS one?

but being AWD i am pretty sure i have a transfer case.

Link to comment
https://www.sau.com.au/forums/topic/220328-engine-oils/#findComment-3891556
Share on other sites

hey guys with the oil gauge..

issert best if its lower or higher up the meter????

and can someone explain further?

i use mobile 1... quite expensive, that with iridium plugs

omg even though im gonna sell it soon,

u gotta treat ur skyline with beautiful love !

Link to comment
https://www.sau.com.au/forums/topic/220328-engine-oils/#findComment-3891944
Share on other sites

should sit about 2/3 up

and 1/3 is usually what it stays at for the first 5min in the morning, just because thats life and oil is thicker till the engine warms its self.

what specifically did you want to know but?

mobile 1 is good and so are iridiums, yeh being skylines they kill any spark plug faster than most cars so

looks like we are spoiling our cars :)

Link to comment
https://www.sau.com.au/forums/topic/220328-engine-oils/#findComment-3892016
Share on other sites

Im thinking of using motul gearoil and for my diff to

everyone think this would be ok

also my heatshields rattle in my gearbox so there is a bit of wear and tear

eventhough its only 8 year old gear box :unsure:

Link to comment
https://www.sau.com.au/forums/topic/220328-engine-oils/#findComment-3896289
Share on other sites

royal purple all the way. i used motol turbolight before till i got my hands on the royal purple. hard to come buy tho unless u know a machanic

What weight is your royal purple???

because i was looknig into i more than redline but i needed a 10w40

Link to comment
https://www.sau.com.au/forums/topic/220328-engine-oils/#findComment-3899560
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
×
×
  • Create New...