Jump to content
SAU Community

Recommended Posts

This is true, but there is no clearance from the sump to the x-member. Thats what i had found in my case.

So you can do it this way, it does work, but no one will engineer it. So technically you will never be able to register that car.

I have done the RB20 in R30 converson twice now and never had any problems with sump clearence.

I have read somewhere (not sure if its true cause both my cars have been HR30's L20ET) that L20ET and L24E engine mounts are different, maybe that has something to do with it?

maybe... mine has ample clearance, it all comes down to the angle the motor sits on.. i cant c why it cannot be engineerd as there is no welding or modifications to the crossmember or the mounts..

ne way just got a blue slip wit rb25 numbers so to the untrained the motor came out in that car. true ?

Under new legislation in NSW any engine conversion has to be engineered, and as Ghostrider said if you have a smash the insurance companies will most certaintly void your coverage, plus you were technically driving an illegal car so in some cases you might get charged (especially with all this stupid anti hoon sh#t going on at the moment).

Link to comment
https://www.sau.com.au/forums/topic/220604-r30/page/2/#findComment-3900562
Share on other sites

+1.....

mate just to let you know Mr G is not one to piss off in almost evey thread youve posted in....

especially you being in St Leonards etc

If youve ever met the fella he is very resonable, but he's the last guy id want to be in his bad books!

I kinda see what your trying to say, but this aint the place.

and do you still have that splti dum ofor sale?

Link to comment
https://www.sau.com.au/forums/topic/220604-r30/page/2/#findComment-3906125
Share on other sites

  • 2 months later...

Not sure if any one cares but, I have done the RB25 conversion and had an engineers certificate done in QLD which has since been ratified in NSW.

The writing I read indicate I did not need any furhter engineering paperwork because the new engine was less than a 10% increase in capacity of the original and yes the blue slip was completed "legitimately".

I told my insurance company and the only thing they did was increase my premium by $100.

Link to comment
https://www.sau.com.au/forums/topic/220604-r30/page/2/#findComment-4058810
Share on other sites

just wondering waht mods need to be done to a mr30 to fit a rb motor in it??

any help on a easy engine conversion would be great as my L24E motor has droped a big end bearing??

I know I am late with this, but-------

My Qld rego says I have an RB30 in my R30, when in fact it has an L24et.

Now that was an easy conversion.

Ergo get it rego in sunny Qld.

Dead set.

Link to comment
https://www.sau.com.au/forums/topic/220604-r30/page/2/#findComment-4064383
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...