Removing Whole Air Filter

[Curmi]

i wanted to take my air filter, afm the whole pipe off but then i saw there are a couple of pipes attached to it...so can i just block these pipes? or do i let it be.

also anyone else done this? was it easy?

just thought i would ask you guys this befor i chop pipes and hoses lol

thanks

[ignuz]

i wanted to take my air filter, afm the whole pipe off but then i saw there are a couple of pipes attached to it...so can i just block these pipes? or do i let it be.

also anyone else done this? was it easy?

just thought i would ask you guys this befor i chop pipes and hoses lol

thanks

Why?

[Curmi]

Why?

so i can get a dossing sound..

[dmr]

so i can get a dossing sound..

trust me bud, women dont like it. i know you're doing it for the ladiez and think they get nipple fats when they hear it, but really they think you have a small dingaling.

but anyways back to the topic, the 2 pipes connected to the intake snorkel is your blow off valve return line and a crankcase breather (or blowby).

i wouldnt go blocking off the breather but if you're not going to run a bov then you can block off the bov return line.

OR.

save yourself the headaches and potential turbo/engine damage and get a stainless steel intake pipe. you'll have mad flUttErZzZzz.

Edited May 25, 2008 by dmr

[dmr]

oh, and where are you going to mount your afm? on the cooler piping? wouldn't advise it...

[TTT]

so i can get a dossing sound..

I wish they would let Doctor Death come back and Practice in whatever town you are in.

[JAS-25T]

I should so sell blanking plates for the stock bov.

I would make a mint.

[Curmi]

oh, and where are you going to mount your afm? on the cooler piping? wouldn't advise it...

yea i was going to do that why not do it?

Edited May 26, 2008 by R32 DRFT4

[Curmi]

I should so sell blanking plates for the stock bov.

I would make a mint.

i have one alredy blocking my bov but its just a quiet flutter

[Curmi]

trust me bud, women dont like it. i know you're doing it for the ladiez and think they get nipple fats when they hear it, but really they think you have a small dingaling.

but anyways back to the topic, the 2 pipes connected to the intake snorkel is your blow off valve return line and a crankcase breather (or blowby).

i wouldnt go blocking off the breather but if you're not going to run a bov then you can block off the bov return line.

OR.

save yourself the headaches and potential turbo/engine damage and get a stainless steel intake pipe. you'll have mad flUttErZzZzz.

and no i am not doing it for the ladies i have a misses alredylol i just want the big dose sound because i simply just like it

[dmr]

yea i was going to do that why not do it?

1. it's not designed to run in the cooler piping

2. wierd readings

2. the reading pin inside the air flow meter is a delicate object which you wouldn't want to damage at high boost levels.

Edited May 26, 2008 by dmr

[Curmi]

1. it's not designed to run in the cooler piping

2. wierd readings

2. the reading pin inside the air flow meter is a delicate object which you wouldn't want to damage at high boost levels.

i am only gonna run 13-14 psi only..hmm might not do this now arhhh

[R338OY]

Oh look! A pink Unicorn!

Don't do it.

[DECIM8]

Technical info just in, sick dose sound does not come just from metal pipe.. tested and offically makes induction sound louder but not dose.. tightening the bov will tho.

[QUICKY]

mate this site is full of critics. if u want dose, than all the best with it. Whether they think its a wank factor or not, when a car doses everyones heads turn. and so what if they have no performance benefit, neither do bodykits or bigger wheels, yet most cars on this forum have one or the other, if not both

[DECIM8]

Quicky has it on the head, damage wise shouldnt cause a problem on low boost but ive seen the vl guys running 20psi on there rb30s with no issues.. It does sound "off tap"

Omar I looked everywhere for that Pink Unicorn... wtf is it?!

Edited May 26, 2008 by DECIM8

[Curmi]

Technical info just in, sick dose sound does not come just from metal pipe.. tested and offically makes induction sound louder but not dose.. tightening the bov will tho.

how do i tighten my stock bov? can you do that to a stock one?

[Curmi]

mate this site is full of critics. if u want dose, than all the best with it. Whether they think its a wank factor or not, when a car doses everyones heads turn. and so what if they have no performance benefit, neither do bodykits or bigger wheels, yet most cars on this forum have one or the other, if not both

yer i will get dose lol ill look a bit more into it..cheers

[TTT]

go to vlturbo forums.

they have a DIY thread on how to do it.

[dmr]

Technical info just in, sick dose sound does not come just from metal pipe.. tested and offically makes induction sound louder but not dose.. tightening the bov will tho.

you can tighten your stock bov by putting it under a vice grip and "crushing" the top of the bov a couple of millimeter. i would only advise this if you're doing it for bov leaking purposes. using a blanking plate is the same as tightening a bov enough for no air to pass through.

stainless intake pipe will increase the sound of your "dose" because of the resonating sound traveling through. the standard rubber snorkel deadens it.

have a read of THIS. he's apparently the master of "dosing". your new best friend.

hope that helps!

Edited May 26, 2008 by dmr