Jump to content
SAU Community

Recommended Posts

So I'm driving to my girlfriend's house tonight. I'm accelerating up a rather steep hill in third, when at about 3000rpm my car suddenly loses all power. It's like it hit a rev limiter at 3000rpm. The exhaust starts making a loud, rapid popping noise and the car shudders slightly.

It scared the shit out of me. The car drives fine otherwise, but you push it even slightly and the same problem occures.

Any idea what's going on? Thanks.

Link to comment
https://www.sau.com.au/forums/topic/222178-severe-power-loss/
Share on other sites

Sounds like an ignition problem. Check your plugs/leads/ignition coils.

There is also a possibility you could be using low octane/tainted fuel (mate of mine had a similar problem with his Maxima as you described, he drove it was nearly empty and re-fueled - problem went away).

So I'm driving to my girlfriend's house tonight. I'm accelerating up a rather steep hill in third, when at about 3000rpm my car suddenly loses all power. It's like it hit a rev limiter at 3000rpm. The exhaust starts making a loud, rapid popping noise and the car shudders slightly.

It scared the shit out of me. The car drives fine otherwise, but you push it even slightly and the same problem occures.

Any idea what's going on? Thanks.

could be your viscus hub cluctch is f**ked happend to me kinda same thing ...if you havent converted to a electro fan allready check when you cars off and cooled down if the big fan blade at the front of your car spins with ease if its stiff thats your prob if not dunno bro hhaahh. good luck

hmmm.. wot about your afm? if the plug has come out doesnt it barely get over 3 grand? and its "like theres a rev limiter at 3000rpm"

just a thought...

cuz if the car has gone blind in the amount of air its sucking in, I believe it would cough and splutter or possibly even shudder as you said... and the poping may be the fuel ratio getting too rich/lean... cuz the car has gone off the standard air/fuel maps and has gone crazy:P

Exact same thing happened to me,

RB25DE issue.

Spark plugs and Coils are your best bet, the car will shudder non stop as soon as you hit over 2500 or 3000 rpm.

It happened to me last week and freaked me out, got new platinum sparks and splitfire coils.

Works a treat !!

MRXTCZ

Plats were provided by DRC in Greenacre man, his a good bloke, Gil's his name director of DRC.

I called him up basically after telling him ive been reading and told him what the symptoms were, and his like yup. Sparks are gone, and known hassle is coils, one of fix !

I was like hektik!! i bought the coils, and he supplied the plats and full service.

Anyways, Kez, trust me bruh, when u goto ur mechanic and just get ur sparks done, then find out it doesnt fix it, then you gotta go hunt down splitfire coils, then go back to him and get charged again to get them into the RB25, its a mad headache ripping the top end off to just get into the god damn sparks and coils -.-

I was smart though, when i took it to DRC, i told Gil i need the car in 2 hours, he got 2 mechanics to work on it, and was done in less den an hour and a half. ;) sweeettt!!

Trust me, you wanna go the full 9 yards once your in there, so might aswell mod it now, and tick that one out of your lil Holy Mod Book!

But yeah, i saw a coil replacement guide on here, just a few threads below this one, you COULD do it yourself and save the labour costs, but in my opinion i would just get it down to a garage, not a normal petrol station garage, take it to one that knows their S**T bout' imports.

MRXTCZ

P.S Hahahahaha Cris!! THE MAN OF THE HOUR !! :)

Edited by MR_XTC

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...