Jump to content
SAU Community

Recommended Posts

more research again, two very poor shocking turbos to use :)

Plenty of good, low mounted (read bolt on, and cheaper as a consequence) turbos on the market that will make the same power, but with much better response.

Also read the Forced Induction section (if you must go down that road), there is a thread about wastegates in the FI Guide

Link to comment
https://www.sau.com.au/forums/topic/223080-wastegates/#findComment-3930474
Share on other sites

i have got a t3/t4 turbo and thta works fine and i have got a hks 50mm wastegate running that and i have had no problems with that turbo! i have got a friend making over 400kw and he is using two t3/t4 turbos so i reckon they are great turbos to use!!!!!!!

Edited by madevo3
Link to comment
https://www.sau.com.au/forums/topic/223080-wastegates/#findComment-3930483
Share on other sites

Its not that they cant make power it's the way they make power. As Nismoid said theres other turbos on the market that will make the same power as the T3/T4 but use less boost in doing so and also be more responsive.

My skyline has a factory fitted T3/T4 (1987) so 20 years on you'd assume technology has stepped up a bit?

Link to comment
https://www.sau.com.au/forums/topic/223080-wastegates/#findComment-3930914
Share on other sites

What's with everyone having T3/T4 turbos on their car these days? Is there a sale on at supercheap for $50 turbo's or something?

To answer your question though, something like a 38mm wastegate will be more then enough and obviously you will need an exhaust manifold made for an external gate.

Link to comment
https://www.sau.com.au/forums/topic/223080-wastegates/#findComment-3937883
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...