Jump to content
SAU Community

Recommended Posts

Items:

HKS FILTER with adapter for rb25det/

Malpassi fuel regulator/

FET Turbo Timer + Greedy one Both with plugin looms for R33 s2/

Nolethane Front Castor Rod Bush Set R33 s2/

Fermal Flex Turbo intake pipe + intercooler etc 3" size/

Custom Cusco Coil Pack Cover suit s2 R33/

Standard turbo intake pipe for rb25det turbo/

Age:

hks?

malpassi reg brand new with guage aswell

fet turbo time ? on car when i bought it

greedy turbo timer 6months old

castor rod bush set brand new just opened plstic thats all to have a look

fermal flex brand new

coil pack cover brand new

stand intake pipe good condition no cracks etc.

Condition:

Everything works fine can post more pics if you like but all the stuff is in good condition.

Price:

hks Filter: $50

malpassi regulator with guage : $130

Fet turbo timer with plug in loom : $50

Greedy Turbo Timer with plug in loom : $60

Nolethane Castor rod bush set suit s2 R33 : $60

Fermal Flex Pipe : $30

Cusco coil Pack Cover : $145

Standard rb25det turbo intake pipe : $40

To Fit:

(What car)some RB's R33's R34's etc

Location:

Adelaide South Australia

Contact:

you can contact me here or call me on 0401409575(Allan)

Comments:

i need to sell these item's asap all in good condition will post at buyers expense fell free to ask question etc hope to hear from yas

cheers

Allan

100_9423.jpg100_9425.jpg

100_9426.jpg

100_9429.jpg

100_9430.jpg

100_9433.jpg

100_9435.jpg

100_9436.jpg

100_9437.jpg

Edited by R334door(s2)
Link to comment
https://www.sau.com.au/forums/topic/223088-random-stuff-for-sale/
Share on other sites

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

I have also got a ARC blow off valve too don't know what vehicle its for so i can let it go for $50 will take a picture soon.

with the greedy turbo timer its still in my car can remove and take pic's anytime just not now too cold out side lol.

And with the coil pack cover it is polished.

here's the picture off the ARC blow off valve plum back :

i think you will have to get a adapter made up or something.

100_9438.jpg

Edited by R334door(s2)

with the Castor rod bushes i got where from outlaws speed shop in Adelaide i cant remember what brand it is but it is good quality still got mine in the car and they work great.

Bump.

pm sent

pm replied

Custom Cusco Coil Pack Cover : SOLD Pending Payment.(Till Friday)

link to Greedy Turbo Timer Manual -------> "Click me to download Greedy Turbo Timer Manual"

here is the picture of the greedy turbo timer it is abit dusty because off being tucked under the dash.

100_9445.jpg

Edited by R334door(s2)

Greedy Turbo Timer Sold(pending Payment).

does any one know why i cant edit my 1st post its like the edit button went walk abouts after about 2hrs.?????

Bump

i offer $100 for cusco coil pack cover

no thanks $100 is too low

coil pack cover back up for sale person that was interested did not call or get back to me so its up for grabs

so ill do it for $130 pickup OR $145 delivered anywhere in Australia.

can yous please contact me on my mobile as my internet is down at the moment had to goto a friends place to check and update.

my number is

0401409575(Allan)

cheers

Allan

how long is the peice of thermal flex???

About as long as the keyboard on the computer not certain as my tape measure is at my sisters ill find out after for you if you like.

cheers

Allan

most off the items are still available guys "n" girls except for the.

Greedy Turbo Timer which is sold.

bump

Edited by R334door(s2)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...