Jump to content
SAU Community

Recommended Posts

thanks for the part numbers guys but i went down to nissan yesterday and they could not help me.

first off i gave them the part numbers for the mirrors that are posted here, eg 96366-4P000 but they could not find any of the parts.

secondly i gave them my VIN number the WGNC34001.....etc and also the 6U90WGNC34001.... but yet they could not bring up any info on that VIN either.

the guy said when the cars are imported, the Australian authorities stamp on their own VIN, however this WGNC34 number is stamped on multiple places on the chassis

the only other plate is the blue one with japanese symbols so i will try again with those numbers

your vin needs to be 6 digits wgnc34-123456. But they should have been able to find with part #, give them the alternate part # (which is most likely an updated part as the old one wouldnt be used anymore) 96366-4P060. Even try a different Nissan dealer, i never have any problems with my part #s in Brisbane (metro nissan) or Gold Coast Nissan, they are very accomodating for imports.

rofl.

well, if any stagea's have the balls to enter SAUWA's timed track day, I will even be able to tell you how much they get chopped by a "gutless" 4 cyl ;)

Anyway, if you are past 21, you cannot drive a hatch. Not even if you equip the damn thing with a rocket engine. :(

not too much luck at the local nissan, the guy managed to pull up some info.....he quoted me about 120 for the glass, 250 for the folding mirror motor, although he couldnt be certain on these prices....but he was certain it was 600 bucks for the whole assembly. no guarantee that they could get the parts either

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on the hose, sometimes engine out is the easiest option  
    • Get an inspection camera up there. 
    • Yeah, but look at the margin in viscosity between the 40 and the 60 at 125°C. It is not very large. It is the difference between 7 and 11 cP. Compare that to the viscosity at only 90°C. The viscosity axis is logarithmic. The numbers at 90 are ~15 and ~35. That is about half for the 40 wt oil and <half for the 60. You give up viscosity EXPONENTIALLY as temperature rises. Literally. That is why I declare thicker oil to be a bandaid, and a brittle one at that. Keep the oil temperature under about 110°C and you should be better off.   Having said all of that, which remains true as a general principle, if you have indeed lost enough oil from the sump that the pump was seeing slightly aerated oil, then all bets are off. That would of course cause oil pressure to collapse. And 35 psi is a collapse given what you were doing to the engine. Especially if the oil was that hot and viscosity had also collapsed. And I would put money on rod or main bearings being the source of the any noise that registered as knock. Hydraulic lifters should be able to cope with the hotter oil and lower pressure enough to prvent too much high frequency noise, although I am willing to admit it could be the source.
    • Thanks for the reply mate. Well I really hope its a hose then not engine out job
×
×
  • Create New...