Jump to content
SAU Community

Recommended Posts

Rego: Jul 2008

Make: Nissan

Model: 180sx

Milage: 120,000kms

Transmission: 5spd

Colour: Orange - Black roof

Location: Newcastle

Complied? YES

RWC supplied? YES

Currently registered? YES

Price: $11,000

Contact: [email protected]

Comments / Modifications:

1990 CA18DET 180SX.

Rego till June 2008

GT2860R

Microtech LT10S - x4 IGN

Walbro pump

Dual stage Boost controller.

3" exhaust all through.

Intercooler and BOV.

18" RIMS

Tein Coil overs all around.

URAS kit, custom orange with black roof.

HID lights

S15 seats and retrimed doors.

150RWKW @ 10psi.

Has damaged Rear bar. New rear bar provided, not painted.

Has damaged Tail lights and panel under tail lights. All new parts provided.

Damage was due to reversing into parked car, low speed. ALL NEW PARTS IN CAR. Just need fitting and painting.

Should cost between $500 - $1000 to spray and fit, or less if you can fit yourself. Have asked two smash repairers to make sure that is all that is required.

Have been intending to fix since April when I had the accident, but now I just need the car gone. That's why I have the parts because I've been slowly getting them as they became available.

NO TIME to get fixed. New job and moving soon!!

If I can't get $8500 before the end of the weekend, I'll book it in to be fixed and price returns to $11,000 and yes, I've had interest at that price.

email me at [email protected] or sms 0401 091 894

As I'm moving I need a standard newer car that i can insure easily! I'll only be able to park it on the street! So interested in trades for newer standard cars, ie WRX, Integra Type R, must be insurable by 25 yo male.

cheers.

post-19188-1213410939_thumb.jpg

post-19188-1213410952_thumb.jpg

nar there is a smell dent in that. quite small tho, could probably panel beat it into shape yourself without much effort, or get them to bog and spray when they spray the rest.

now up on ebay. selling by saturday is likely.

  • 4 weeks later...

hey there, would u be intrested in a swap with a pulsar n14 sss 92, with full custom red interior, bucket seats, lsd, g4 adjustable suspension, sr20, k&n pod, exhuast,

17inch black gestalt rims, rego, tints, big system etc? pm me if ur keen, baby blue coulur, wingless

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...