Jump to content
SAU Community

Bbs Rg-r Wheels Only Wiegh 8kg

evlgtr
 Share

Recommended Posts

evlgtr Proficient

evlgtr

Posted
Posted

Item:BBS RS-GT wheels and tyres

Condition: Very very good

Price: $2500

To Fit:5/114 came off r34 GTR suit nissan , toyota , mazda, ford etc

Location:S/E suburbs Vic

Contact: private message or ring Jarrod 0433663833

Comments:

Selling the BBS RS-GT wheels off my GTR .

BBS RG-R

Wieght 8Kg's without tyres

18 x 9.5

5X114.3 stud pattern

+18 offset

245/35/18 tyres in Good condition

These wheels came off my R34 GTR As it was a track only car rims are not guttered at all .

asking $2500

Thanks

Link to comment
https://www.sau.com.au/forums/topic/223817-bbs-rg-r-wheels-only-wiegh-8kg/
Share on other sites
GTRBOS Mentor

GTRBOS

Posted
Posted

interested in trade with cash for yours

i got some genuine zepter wheels, they are 17 by 9.5 all around, they are forged 3 peice wheels, they are also leaightweight wheels and have a very nice dish on them, they are currently on my r32 gtr, they have been professionally polsihed and come with excellent tyres 255/40/17 all around, not sure on the offset but here are copuple of pics of them on my r32 gtr, here are couple of pics,

please pm or call me if your intersted on 0412862091, even if u need pics just pm me

cheers tony

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Nice....looking forward to that update
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...