Jump to content
SAU Community

Recommended Posts

Hi guys,

I get a loud crunch for about 1-2 sec everytime i start the engine and also loud tapping sound (sounds like pistons) when i first start my car in the cold morning. Now if i was to warm the car up, take it for a drive then turn the engine off to start it back up again to look for the sound, the sounds gone away due to it being warmed up. Hence, why is the reason i can't take it to any mechanic to show the issue. :domokun:

Ive only noticed this loud crunch for 1-2 on cold start after ive changed my oil to 'Elf Synthetic Oil 10W50'. This is pretty much all the relevant information i can provide from my knowledge, and also that the sound is coming from under the hood on the passengers side, kinda sounds like its coming from the head area on the passengers side where the turbo is and all.

Could it be that im using a real thick oil, hence is why its making weird noises on cold start till its warmed up?

Note: The crunch sound is only for about 1-2 sec on cold start and not constant whilst idling in cold or driving.

Much appreciated for any helpful response.

Edited by R33Turbo
Link to comment
https://www.sau.com.au/forums/topic/223891-please-help-identify-the-issue/
Share on other sites

thanks alot for the input man. maybe it is the starter motor! how much is it to replace? or repair? aproximately? is it still driveable (as the sound goes away)?

Also i get louder engine ticking sound especially in the morning rather than when it was warmed up? could that be related?

I wouldn't wait too long to get it checked, if it is infact the issue and it's disengaging either slowly or not at all it will be spinning at higher revs than it's designed to for longer than it's designed to, the starter gear could shatter or lockup causing damage to your flywheel ect.

Starter motors use centrifugal force and a grooved shaft to throw out the gear, it could be clogged up and only need a clean or you may have to get it repaired or exchanged. You'll have to call around locally for an idea of availability & price. Auto elec places ect...or get a wrecker one.

It's not a huge issue or costly, so I do hope you find it to be the cause.

Edited by madbung

Could be an indication it's clogged up with grease/grime/oil ect when it absorbs the heat from use/engine it could free it up somewhat.

Then when it cools it sets again again...so to speak.

Get it checked out either way.

i've got the EXACT same problem, i'll have to check the starter motor

i think it may be the thickness of the engine oil we're using...maybe its just too thick! try thinner oil and let me know cuz my service is another 4000km away :)

Absolute rubbish, re: oil thickness...If someone can say why running thicker oil will make a grinding crunching mechanical noise on start pls share.

Thicker oil takes longer to fill lifters ect on start up so you'll get an extended tappet type noise until they fill up thats all.

It can not make grinding or crunching sounds, it's oil !!....thats the noise mechanical problems make.

This forum is becoming rife with bad advice..

Edited by madbung

Funny this. I've got excatly the same problem, clutch is in its last days and I get that crunching sound on cold start.

I've been suspecting the starter motor.

OH!!!

Yep well ive got a close answer now....

its definitely my 'starter motor' and its due to my clutch going ! (starter motor may be covered with clutch dust and seizing up)

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...