Jump to content
SAU Community

Recommended Posts

that guy is a douche lol

if he took as much care of his GTR as he did doing his hair, it would be all good lol

cant be as bad as the sik kent at the ns cruise with the white jza80 n/a chirpin 2nd slightly impressing his blond slap....edit gf, only and no1 else :P ?

If you can afford to build a built RB26, and NOT a atleast brand new timing belt... What the...?

There is NO decent reason for someone using a 2nd hand timing belt, none what so ever. Leave the car off the road untill you can afford it..

'He needed to get to work on Monday' Babow - Car pool? Catch public transport... No reason is worth smashing a motor let alone a built RB26. Imo Its funny... If your going to be silly enough to do that then enjoy the piston and valve making love. Its not a misforutune... Its straight up stupidity. I would feel for someone that spins a bearing in a RB26... That is misfortune... Not replacing parts on an engine, one as vital as a timing belt with dodgy 2nd hand sh!t...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...