Jump to content
SAU Community

Recommended Posts

Hi guys,

MY R33 has been with my mechanic for the past month trying to solve a mystery of why the injectors have been hitting 100% duty cycle after 6500rpm. We tried everything including a new ecu etc etc. While my mechanic took it for a drive on a really hot day approx 33 degrees he noticed that the intake temps shown on the power fc commnader were going ballistic and hitting 90 degrees which sounds pretty destructive. From that he has sussed out why the njectors go mad. It seems the Power Fc reverts to a correction map high up the RPM range to prevent detonation. We are now stuck to why the inlet temps are going mad. Intercooler is fine, etc the only things being wrong are the rad cap being dodgy and leaking at high temps. He said that it may have something to do with it but im not sp sure.

Anyone got any ideas???? Any help appreciated.

Cheers

Gez

Link to comment
https://www.sau.com.au/forums/topic/22410-crazy-intake-temps/
Share on other sites

Hiya mate,

I bought the car as it is. From the looks of things it has std turbos which may have steel internals, Intercooler doesnt have any signs of a make on there but it looks like a Trust unit, it has 260 degree cams. I took it to GTART (uk meachnic) to have the car mapped and it got 467bhp at the crank @ 0.9 bar and 95RON petrol. We later tried 1.2bar boost and got 505bhp but the injectors were going mad so we aborted the 1.2bar map. We later noticed that the car didnt have a thermostat which was weird. We have now also noticed that the rad pressure cap is dodgy as it leaks every time someone lays a finger on it when its hot so it looks like its not holding pressure. It seems that the car was running high bhp back in japan as a load of bits have been taken off like the uprated rad, load of guages and turbos.

I dont really fancy running 90deg intake temp as the engine will just go pop so need to fix it as the car does drive really nice.

Any help greatly appreciated.

Cheers

Gez

Ok, this is where it gets more interesting, there wasnt a thermostat in the car when i got it from Japan......It aint doing the car much good coz when it gets too hot the Power FC goes into a correction made and fires the injectors at 100% in order to cool the engine down little to prevent detonation.

Gerry

never seen a car without a thermostat? what kind of petrol head are you? If only you knew just how many cars deliberatly remove them before going on the supercruise around natex come summernats time.....

:-)

Guest INASNT
Originally posted by 2rismo

never seen a car without a thermostat?  what kind of petrol head are you?  If only you knew just how many cars deliberatly remove them before going on the supercruise around natex come summernats time.....

:-)

y would u remove it?? so that the comp doesent go into safe mode when the car overheats?

He is talking about air intake temperature.

The leaking radiator cap and lack of thermostat (not thermostat housing that i think you are thinking of INASNT) are unrelated to the high air intake temperature. The car will not overheat with a leaking radiator cap unless it runs out of water (or gets close to) hence why the guage is normal. People remove thermostats (like bl4ck32) to stop the flow restriction and keep the coolant flow at a decent speed. When removed the vehicle takes longer than normal to get to normal operating temperature.

As for the excessive air intake temperature it could be many things such as blocked or damaged intercooler or a collasped hose or blocked filter/s.

With a GTR with the front mount (of that size) the intake air temp really shouldn't rise over 60 degrees, on my car i can't remember the air intake temperature ever really getting over 40 degrees and i have had sub zero temperatures registered (i live in the mountains).

Do you run exposed pods in your bay because that could be the start of the cycle.

Also if the car is running lean (you mentioned the injectors maxing out) this increases overall operating temperature of the combustion process.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...