Jump to content
SAU Community

Recommended Posts

Just found this on 350Z-Tech.

For those people looking at running 18" rims with a very thin barrel, or 19" rims, rather than trying to source the OEM Brembos from an early model V35 or Z33 with its 12.5" rotors, why not go a step up and source the brakes from the new Infiniti G37 Sport and get 14" front rotors, and 13" rear ones?

Vendors in the USA are selling full OEM-spec kits for USD$1700 (plus the cost of the custom mounting bracket), which is about the same as the AUD$2500 I paid for my OEM Brembos back when I upgraded.

Aside from bigger rotors, the Akebono calipers are also larger. Not sure about relative quality, but if they're a proper Nissan part they won't be as bad as other unknown random brands.

comparison2.jpg

At the very least, this should drive down the cost of the Brembos as people upgrade to an OEM quality big brake setup. If I can get confirmation that these will fit under my 18" TE37s, I'd consider offloading my Brembos.

Link to comment
https://www.sau.com.au/forums/topic/224453-cheapish-big-brake-kit-for-v35s/
Share on other sites

that caliper is huge, would be good to know if they have any performance benifit over the brembos...

From pad surface area alone you would assume they would have to have some benefit.

These will also only come down in price as the US guys start upgrading to bigger brand name kits, you would imagine.

So.....who knows about interchangability between the kits you guys use on the 35's and the R32's?

Not 100% sure Steve, but pretty sure that the Brembo's on the V35/350Z are the same as the Brembo's on the 33/34 GTR.

The new V36 ones pictured need an adapter for the V35 so you would definately need this, but might be different if you already need an adapter to fit 33/34 Brembo's

Just found this on 350Z-Tech.

For those people looking at running 18" rims with a very thin barrel, or 19" rims, rather than trying to source the OEM Brembos from an early model V35 or Z33 with its 12.5" rotors, why not go a step up and source the brakes from the new Infiniti G37 Sport and get 14" front rotors, and 13" rear ones?

Vendors in the USA are selling full OEM-spec kits for USD$1700 (plus the cost of the custom mounting bracket), which is about the same as the AUD$2500 I paid for my OEM Brembos back when I upgraded.

Scathing,

when you upgraded yours to brembo calipers, did you need to make a custom bracket or is the factory oem brembos from 350Z/V35 bolts on to the non-brembo mounting points?

when you upgraded yours to brembo calipers, did you need to make a custom bracket or is the factory oem brembos from 350Z/V35 bolts on to the non-brembo mounting points?

Pretty sure it was the factory bracket. Had it installed by Pro Concept and they didn't charge me for a bracket. When I asked, they said they didn't need to custom make anything.

You will have to cut away the rotor shield, of course. Some of the bolts may not be the same either. The brake lines definitely don't match, so make sure you get the OEM Brembo lines with the calipers or, like me, just get braided ones.

well bolts is not included so I hope that's not hard to find in the brake shop... and missing 1 brake hose, so might go for either Nismo one or Maltech one for about $400-ish.

Do you reckon it's worth finding a brembo sized rotor shield?

I've driven the car for over a year, street and track, without rotor shields. Personally, I don't think its necessary. However, I'm sure the OEM installed them for a reason...I just don't know what.

I'm using Maltech lines too. V-Sport is selling Goodridge braided lines for about half the price of the Maltechs, but I'm not sure of the Goodridge's ADR status.

That link is no longer available... so quick?

must have sold already!

http://cgi.ebay.com/ebaymotors/_Car-Truck-...0232360531&

search for "g35 big brake kit"

its sold through riverside infiniti and includes f+r calipers, f+r rotors, f+r pads, dust shields, brake lines, brake fluid

and a custom bracket from japan

for $2550 + postage

not bad at all i think

only problem is the calipers would say "infiniti" instead of nissan

  • 4 months later...

Wouldn't powder coating calipers be a bit dangerous or time consuming as the seals and rubber boots would all need removing first.

Really need to ensure that the seals do not get covered in that process.

Easier, imo to organise some high heat paint and coat them in that. It isn't that expensive either and you can do a really nice job on the bench with a new caliper.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...