Jump to content
SAU Community

Fitting Blitz Injectors To A R34

shnaped_second
 Share

Recommended Posts

shnaped_second Mentor

shnaped_second

Posted
Posted

Bought some Blitz 525cc injectors of greenline and spacers, Part # 31209, got a mechanic to try and fit them to my car but he couldnt get them to fit, said that the orings dont fit and there wouldnt be enough room for them and the fuel rail in between the manifold. So basicly paid $200 to get my old injectors pulled out and put back in. Can anybody help if you have fitted injectors to a r34 please.

Thanks

Brad

Link to comment
https://www.sau.com.au/forums/topic/224595-fitting-blitz-injectors-to-a-r34/
Share on other sites
darrinspencer Grand Master

darrinspencer

Posted
Posted

I just sent you the same info via PM

I took one of my old injectors and the new ones and the fuel rail to a mobile injector guy and got 12 new orings to suit, cost me $20 on a sunday. There was a 6 "green" thicker round orings and 6 black cyclinder shaped orings used.

You need to remove some of the smaller orings that come with them the blitz injectors

I have seen the blitz injectors on Yahoo japan for sale and come with additional orings

I had them in for approx 2000k's with no problems. I have since returned my car back to stock and sold them

No other mods needed. the plugs go staight on. no need to use the supplied plugs.

Fit the spacer between the manifold and fuel rail. I did need to use longer bolts

shnaped_second Mentor

shnaped_second

Posted
  • Author
Posted
*shudder* it is a horrible job to do though, space is limited but it's not impossible...nice to see it's coming along Brad!

Yeah thats why i thought id pay sum1 to do it instead of me, gtrs is fitted just gota get these fitted and my z32 afm and should see around 260rwkw

33_skyline Enthusiast

33_skyline

Posted
Posted

I had the same problem on an R33 S2. (I assume same fuel rail)

Swap the O-rings with the factory injector O-rings.

Once the O-rings are on you will notice a lip above the bottom O-ring (middle injector - purple top)

You can sort of see it in this picture attached.

You need to trim this lip back a little, a set of side cutter pliers will do.

The injectors should then fit, you do also need the blitz injector collers (which you said you bought).

Then you have the injector caps (hold the injector into the fuel rail) they have a little rubber piece underneath that you pull out

and then sits snug on top of the injector

They should sit the same as the stock injectors so shouldn't have a problem with clearance on the plenum top is

back on

If you have anymore questions just ask.

There is also a pic of the injectors installed in my car.

post-35997-1213924220_thumb.jpg

post-35997-1213925119_thumb.jpg

shnaped_second Mentor

shnaped_second

Posted
  • Author
Posted
Need to remove the top of the inlet plenum to get access to the injectors

Yeah he split the manifold in half

I SMS'd you a pick mate.

Thanks mate

I had the same problem on an R33 S2. (I assume same fuel rail)

Swap the O-rings with the factory injector O-rings.

Once the O-rings are on you will notice a lip above the bottom O-ring (middle injector - purple top)

You can sort of see it in this picture attached.

You need to trim this lip back a little, a set of side cutter pliers will do.

The injectors should then fit, you do also need the blitz injector collers (which you said you bought).

Then you have the injector caps (hold the injector into the fuel rail) they have a little rubber piece underneath that you pull out

and then sits snug on top of the injector

They should sit the same as the stock injectors so shouldn't have a problem with clearance on the plenum top is

back on

If you have anymore questions just ask.

There is also a pic of the injectors installed in my car.

pretty much got it all sorted just gota get some Orings now then should be all good

Thanks again guys

666DAN Grand Master

666DAN

Posted
Posted
Yeah he split the manifold in half

Thanks mate

pretty much got it all sorted just gota get some Orings now then should be all good

Thanks again guys

Bah, leave the manifold in place you'll find it's a nice challenge......that's what I keep telling myself :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • Watermouse
      "Cheap" bolt on turbo on RB25DET NEO

      By Watermouse · Posted

      https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • Kinkstaah
      Airbox for +T

      By Kinkstaah · Posted

      It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • GTSBoy
      Airbox for +T

      By GTSBoy · Posted

      By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
    • BuiltNotBought
      Airbox for +T

      By BuiltNotBought · Posted

      There is a guy who said he can weld me piping without having to cut chassis, maybe I do that ? Or do I just go reverse flow but isn’t reverse flow very limited once again? 
×
×
  • Create New...