Jump to content
SAU Community

Fitting Blitz Injectors To A R34

shnaped_second
 Share

Recommended Posts

shnaped_second Mentor

shnaped_second

Posted
Posted

Bought some Blitz 525cc injectors of greenline and spacers, Part # 31209, got a mechanic to try and fit them to my car but he couldnt get them to fit, said that the orings dont fit and there wouldnt be enough room for them and the fuel rail in between the manifold. So basicly paid $200 to get my old injectors pulled out and put back in. Can anybody help if you have fitted injectors to a r34 please.

Thanks

Brad

Link to comment
https://www.sau.com.au/forums/topic/224595-fitting-blitz-injectors-to-a-r34/
Share on other sites
darrinspencer Grand Master

darrinspencer

Posted
Posted

I just sent you the same info via PM

I took one of my old injectors and the new ones and the fuel rail to a mobile injector guy and got 12 new orings to suit, cost me $20 on a sunday. There was a 6 "green" thicker round orings and 6 black cyclinder shaped orings used.

You need to remove some of the smaller orings that come with them the blitz injectors

I have seen the blitz injectors on Yahoo japan for sale and come with additional orings

I had them in for approx 2000k's with no problems. I have since returned my car back to stock and sold them

No other mods needed. the plugs go staight on. no need to use the supplied plugs.

Fit the spacer between the manifold and fuel rail. I did need to use longer bolts

shnaped_second Mentor

shnaped_second

Posted
  • Author
Posted
*shudder* it is a horrible job to do though, space is limited but it's not impossible...nice to see it's coming along Brad!

Yeah thats why i thought id pay sum1 to do it instead of me, gtrs is fitted just gota get these fitted and my z32 afm and should see around 260rwkw

33_skyline Enthusiast

33_skyline

Posted
Posted

I had the same problem on an R33 S2. (I assume same fuel rail)

Swap the O-rings with the factory injector O-rings.

Once the O-rings are on you will notice a lip above the bottom O-ring (middle injector - purple top)

You can sort of see it in this picture attached.

You need to trim this lip back a little, a set of side cutter pliers will do.

The injectors should then fit, you do also need the blitz injector collers (which you said you bought).

Then you have the injector caps (hold the injector into the fuel rail) they have a little rubber piece underneath that you pull out

and then sits snug on top of the injector

They should sit the same as the stock injectors so shouldn't have a problem with clearance on the plenum top is

back on

If you have anymore questions just ask.

There is also a pic of the injectors installed in my car.

post-35997-1213924220_thumb.jpg

post-35997-1213925119_thumb.jpg

shnaped_second Mentor

shnaped_second

Posted
  • Author
Posted
Need to remove the top of the inlet plenum to get access to the injectors

Yeah he split the manifold in half

I SMS'd you a pick mate.

Thanks mate

I had the same problem on an R33 S2. (I assume same fuel rail)

Swap the O-rings with the factory injector O-rings.

Once the O-rings are on you will notice a lip above the bottom O-ring (middle injector - purple top)

You can sort of see it in this picture attached.

You need to trim this lip back a little, a set of side cutter pliers will do.

The injectors should then fit, you do also need the blitz injector collers (which you said you bought).

Then you have the injector caps (hold the injector into the fuel rail) they have a little rubber piece underneath that you pull out

and then sits snug on top of the injector

They should sit the same as the stock injectors so shouldn't have a problem with clearance on the plenum top is

back on

If you have anymore questions just ask.

There is also a pic of the injectors installed in my car.

pretty much got it all sorted just gota get some Orings now then should be all good

Thanks again guys

666DAN Grand Master

666DAN

Posted
Posted
Yeah he split the manifold in half

Thanks mate

pretty much got it all sorted just gota get some Orings now then should be all good

Thanks again guys

Bah, leave the manifold in place you'll find it's a nice challenge......that's what I keep telling myself :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • GTSBoy
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By GTSBoy · Posted

      That's hilariously putrid!
×
×
  • Create New...