Jump to content
SAU Community

Recommended Posts

So you think you've got some artsy shots? I'm gonna be redoing the design of the forums, it'll have a "light" and "dark" theme, so will have two different banners to suit. In addition there may be different banners for the V35 section, the Ceffy section, and if I can be arsed, the different states.

The photos would have to be preferrably lending themselves to backgrounds etc... not necessarily in a studio setting either:

caymanspde1_hi006.jpg

post-13869-1187799769.jpg

post-13869-1187799827.jpg

are ones that have been posted that come to mind.

Also please post up photos of your local town etc which I could use as a backdrop. Its been almost 4 years since I did the banner up there atm.

As I said the photos don't have to be perfect, as long as they're high enough a resolution that I can touch them up, and change backdrops etc. Feel free to watermark your stuff if you're linking them, I'll contact you for originals if I like your pic.

pic i took of a mates car...

100_0430.jpg

dark sky... pic i took

image011.jpg

another sky shot by me

IMG_2652.jpg

32 GTR in motion... also by me might help for the design

IMG_2726.jpg

pic of mine by me

IMG_2268.jpg

older pic of mine

image007.jpg

second last another old one

image009.jpg

last one maybe

image008.jpg

deffo teh last one :P

image005.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...