Jump to content
SAU Community

Recommended Posts

i have my white 17x8 enkei rpo2's for sale woth 80% front tyres and rears are on the wear indicators with wheel nuts etc they have mimimal gutter marks they could use a re paint if u are fussy but it sorta doesnt bother me too much.... would look sweet polished but....

they are all 235/45/17's...fronts are worn even and have about 80% tread left rears are definatley usable but not legal...they fit on my r32 gtst without any spacers what so ever and they are in the right spot (they arent too far in or out etc) $1500 cause these wheels are over $600 each new... and pretty hard to find decent used ones...

hey dave my rims r the same as white r32 but they silver one of em needs a rerole which dont cost much at all the front tyres r 235/45/17 and they have bout 85% or so left and the back r 255/40/17 but they need new ones they r 17/8 front and 17/9 rear i was looking for a grand for the rims but since one needs a rerole ill sell em for $900 with the tyres it up to u. i am a metel polisher so if u want them for that much get them stripped of the tyres and get the rim rerolled then i could polish them for u. get back to me thanks mate.

got a set of 17x8s , they are csa pursuit , i dont have any pics but u can go to www.mullins .com.au and look for pursuit .

they have 235x45x17 falkens 2x90 % 2 x 70 % wheels are unmarked ( 1st set of tyres ) will fit skylines . looking for $900

email [email protected]

well im thinking of selling these, but 1500 is the lowest ill go as 1700 is more what i was after.

17 x 8 and 17 x 9 work meister s2rs with polished *deep* dish :)

continental contisport 225/45 and 245/40 rubber with about 50% all around.

a few scratches here and there, but nothing major. overall pretty good knick.

heres a pic on the car.

if youre after more detailed pics of the wheels, email me at [email protected] and ill send you some detailed pics of the wheels so you can see exactly what they look like.

car.jpg

George

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...