Jump to content
SAU Community

Recommended Posts

i have my white 17x8 enkei rpo2's for sale woth 80% front tyres and rears are on the wear indicators with wheel nuts etc they have mimimal gutter marks they could use a re paint if u are fussy but it sorta doesnt bother me too much.... would look sweet polished but....

they are all 235/45/17's...fronts are worn even and have about 80% tread left rears are definatley usable but not legal...they fit on my r32 gtst without any spacers what so ever and they are in the right spot (they arent too far in or out etc) $1500 cause these wheels are over $600 each new... and pretty hard to find decent used ones...

hey dave my rims r the same as white r32 but they silver one of em needs a rerole which dont cost much at all the front tyres r 235/45/17 and they have bout 85% or so left and the back r 255/40/17 but they need new ones they r 17/8 front and 17/9 rear i was looking for a grand for the rims but since one needs a rerole ill sell em for $900 with the tyres it up to u. i am a metel polisher so if u want them for that much get them stripped of the tyres and get the rim rerolled then i could polish them for u. get back to me thanks mate.

got a set of 17x8s , they are csa pursuit , i dont have any pics but u can go to www.mullins .com.au and look for pursuit .

they have 235x45x17 falkens 2x90 % 2 x 70 % wheels are unmarked ( 1st set of tyres ) will fit skylines . looking for $900

email [email protected]

well im thinking of selling these, but 1500 is the lowest ill go as 1700 is more what i was after.

17 x 8 and 17 x 9 work meister s2rs with polished *deep* dish :)

continental contisport 225/45 and 245/40 rubber with about 50% all around.

a few scratches here and there, but nothing major. overall pretty good knick.

heres a pic on the car.

if youre after more detailed pics of the wheels, email me at [email protected] and ill send you some detailed pics of the wheels so you can see exactly what they look like.

car.jpg

George

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...