Jump to content
SAU Community

Recommended Posts

Hey guys got my r32 skyline over 6 months now and just realised it has a rb20det ecu in it (engine is a rb25det btw). How can this be? I thoght 25 ecu's have different pin outs than rb20 ecu's. Also VCT isnt supposed to work with the rb20 ecu is it? And i think my VCT is working fine... could be wrong though, any way of checking? Anyway just wanna know if anyone can help me work out whether my loom has been modified or something as the ecu hasnt been. Also rb25 power fc works in the car so im just really confused. Any help would be great...

Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/224814-rb20-ecu-in-my-rb25/
Share on other sites

The computer will plug in to both looms. RB20 Cpu can be remapped / rechipped to suit RB25 and auctually when you want a remapped cpu for a rb25 workshops always use the the rb20 cpu. The reason is the rb20 cpu has a removable chip and is easy to remap / rechip. The rb25 cpu does not have a removable chip and cant easily be upgraded (Upgrade chip to suit Rb25 motor for an Rb20 computer is about $40 + $70 for TV repair type person to install)

Most likely you will have a rb25 engine, rb25 loom and rb20 computer chipped to run a rb25. and of course a rb25 powerfc will fit and not sure what the guy who poste above means but the power fc completely replaces the std computer

Edited by Brokenz

brokenz: thanks that makes sense, so does that mean that the ecu cant work in a rb20 anymore? and could it work in other rb25 engines?

nismoh: no problems mate, all running great. Although i didnt do the engine conversion, bought the car with it already done. Definatley recomend the upgrade though mate

  • 2 weeks later...

hey im in the middle of doing the rb20 ecu with a rb25 tune chip on a rb25 but ive connected the computer and the car runs fine but no tacho just wondering if you need to change the tacho wiring on the ecu from pin 7 to pin 5 to suit the rb20 ecu

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...