Jump to content
SAU Community

Recommended Posts

Hi all,

I want to source new, or get my existing interior trim re-finished. The i am referring too is the plastic trim inserts parts around gear shift, and the entire dash.

Is there a company that offeres some soft of re-coating, or re-finishing to restore it to perfect condition?

I dont want some crazy custom colour or bullshit looking carbon fibre finish...

Cheers,

Ian

Link to comment
https://www.sau.com.au/forums/topic/225072-interior-trim-re-finishing-r33/
Share on other sites

I thought it wasnt paint though. Rather some sort of coating. Seems to attract dust very well not that that is a good thing. I just figured there was a propper way, not a back yarder way of doing this..?

I think the plastic is just painted, just not a normal kinda paint.

seen many skyline interiors resprayed to look better then ever, and like said above it costs alot less. I did it on my VL, full repsray of every bit of dash and probably cost me less then 100 bucks. 3 years later and it hasnt faded, cracked or even marked

The factory plastic paint on r34's is shocking, so I repainted mine and came out looking better than new,

all it took was a few cans of paint and primer, a top coat and some prep work before painting,

took all but a lazy weekend to do (let parts dry overnight)

Ok guys thanks for the info. Im going to be doing some prep work in a few weeks on my other car for major re-spray work, so I'll do the GTR trim at the same time ... I might even post up the before and after pics if I dont turn it into a complete balls up!

Ok guys thanks for the info. Im going to be doing some prep work in a few weeks on my other car for major re-spray work, so I'll do the GTR trim at the same time ... I might even post up the before and after pics if I dont turn it into a complete balls up!

It's very easy. here are some quick pics I snapped just now in the dark of what I done with mine.

We have a spray booth at work, and used auto paint to spray it, along with another two coats of clear.

nicely painted plastic interior + leather gear and handbreak boots from an sau user + blue LED globes for cluster and A/C controls from another sau user =win

post-55-1214308556_thumb.jpg

post-55-1214308569_thumb.jpg

post-55-1214308584_thumb.jpg

post-55-1214308598_thumb.jpg

post-55-1214308664_thumb.jpg

Thats a GTS-T right? There interior trim is a little diferent. The GTR trim has a sort of soft coating on it rather than a hard finish normally. I found this out when I bought a replacement light switch trim part off ebay and noticed the trim coatings were completely diferent to my GTR.

Either that... or what is already in my GTR is not stock...

Dont you find all that blue light a bit much when your driving at night?

Has anyone else got more pics?

Cheers,

Ian

doxximus, what colour is that? I'm looking at respraying mine soon, and I wanted something like that.

Mine is red at the moment, I thought it would be cool... but now I think its kinda gay. Plus the spray painter was retarded (it was me :D)

Ian, that covering is stock. Looks ok, but mine was peeling off. But it took me about 4 hours to scrape it all off with a spoon!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...