Jump to content
SAU Community

Recommended Posts

Im trying to sell my S1 for 12.5k has genuine 79xxx really good condition has zorst 400r front bar and a few other things, plus it has over 2 years of warranty on it which is transferable, think its a bit steep or not?

Link to comment
https://www.sau.com.au/forums/topic/225211-value/page/2/#findComment-3971714
Share on other sites

It's so weird how everyone tells me the price of an NA skyline has gone up, due to the new P plate law.

But is that actually true? has it actually gone up in value?

Almost certainly, or at least, they haven't depreciated anywhere near as much as the turbos have. I don't know what N/A prices were like before the new laws, but I imagine the difference between an turb and non-turb would be like sedan and auto Skylines are now, only more so.

Link to comment
https://www.sau.com.au/forums/topic/225211-value/page/2/#findComment-3972031
Share on other sites

Almost certainly, or at least, they haven't depreciated anywhere near as much as the turbos have. I don't know what N/A prices were like before the new laws, but I imagine the difference between an turb and non-turb would be like sedan and auto Skylines are now, only more so.

Which is a really good thing for us NA owners, especially me, because I'm stil on my P's, and as soon as I get off or even sooner, I'll sell mine and get a turbo, and the way everything is looking, I think I could get a decent turbo 33 with the money from the sale of my NA, or I could even make a little profit :)

Link to comment
https://www.sau.com.au/forums/topic/225211-value/page/2/#findComment-3972230
Share on other sites

Haha, your lovin' life Charles, I got the same concept as you basically, but instead of selling the NA R34, im thinking of just smacking on a turbo on her.

Time will tell :D

MRXTCZ

Yea, I thought of that aswell, to my 33, but it will cost me a few grand to chuck a turbo in, then I realised with the money I get from this car, I could easily get a series 2 33 turbo. Because I've seen a fair few in car yards and stuff for 10-13k.

Link to comment
https://www.sau.com.au/forums/topic/225211-value/page/2/#findComment-3972664
Share on other sites

Bought my r33 s2 silver 97,000 on the clock.

Lowered, Rims, Window Tinting

Half way between Excellent & Immaculate condition for 13k.

i am fairly confident i could still sell it for 13k now (1 year on)

Are you going to tell them it's been an accident before? :)

Link to comment
https://www.sau.com.au/forums/topic/225211-value/page/2/#findComment-3973538
Share on other sites

Km's make absolutely no diffrence if the engine has only done 50,000km and the rest of the car is in good nic.

If you selling without a doubt,

Start off fairly high 12K? 11.5? Then lower it slowly according to the demand.

Bear in mind that STOCK cars sell for a higher price than cars with simple mods.

Edited by GTS4WD
Link to comment
https://www.sau.com.au/forums/topic/225211-value/page/2/#findComment-3976493
Share on other sites

Thats true man, i loved my R34 when i bought it, simple mods, CF hood, wing and pod. All the rest i want to do, so the demand is pretty high for stock imports these days.

:D Accident!

lols, IMO i wouldnt go near a car if its been in an accident or on REVS

MRXTCZ

Link to comment
https://www.sau.com.au/forums/topic/225211-value/page/2/#findComment-3977256
Share on other sites

What do you consider stock?

My car has exhaust, rims and a pod. I'd personally only consider the exhaust a major modification, but if stock cars are selling for more it wouldn't cost much to replace the stock rims, box and exhaust (well, exhaust could be costly).

I'd happily keep all three for my next car anyway. Well, no. Four stud rims could be an issue.

Link to comment
https://www.sau.com.au/forums/topic/225211-value/page/2/#findComment-3979461
Share on other sites

What do you consider stock?

My car has exhaust, rims and a pod. I'd personally only consider the exhaust a major modification, but if stock cars are selling for more it wouldn't cost much to replace the stock rims, box and exhaust (well, exhaust could be costly).

I'd happily keep all three for my next car anyway. Well, no. Four stud rims could be an issue.

Stock examples means there is less risk some dodgy backyard mechanic has fooled around with it, done a bodgey job and therefore has a higher risk of something major going wrong.

Selling a car is a very unpredictable move. Its all about the market, who wants what, what the "cool" thing at the moment is, what specific people are looking to buy a car etc. It only takes one person to like your car for it to be sold.

Because your car has rims pod and wheels that may be an insentive for someone to buy your car over another one.

Bear in mind; you may be getting a higher profit if you sell the individual items before you sell the car.

Modified is not always best. A good freind of mine has a Mitsubishi Galant VR4 (very similar to an EVO 3) for sale in Sydney,180 AWKW, bullet proof driveline, everything of the highest workmanship, tuned by a bloke who tunes EVO's for rally and is VERY highly reguarded.. all for 8K.. and absolutely no one wants it

Best thing to do.. it notify the seller in the add your willing to sell with or without mods.. and just keep going with the ad.

Link to comment
https://www.sau.com.au/forums/topic/225211-value/page/2/#findComment-3979501
Share on other sites

Frankly that comment just goes to show how ignorant you are about cars. as long as you have the import papers showing the km's on it, you should be pretty right. the average australian does about 15k a year, and it depends if its a daily or just a weekend'er.

in Japan when the cars get serviced the km's get entered into a DB, and when the car gets dereged to get exported they compare whats on the car with the DB to make sure they match up and if it doesnt look right they mark it on the papers.

Importing your self you shouldnt have too much worry, but buying from an import dealer, you should always ask for the import papers, and if they arent willing to show them to you, dont buy the car.

and that comment just shows how ignorant you are....

There is no way the majority of 60k km skylines out there are legit, yes there maybe one or two but 99% of them are DEFINATELY wound back. A car that is ranging from 10-15yrs old just simply cannot have those kms, regardless how congested the traffic is in japan and little it is driven. I've seen a fair few r33's with those sort of kms on it straight from dealers with all the correct papers, and they are piles of shit with at least 200k+kms on it, like mentioned the interior tells the story. My bosses son, just bought one, series 1 with an apparent 60k km on it and guess what it had a sticker saying the TIMING BELT WAS CHANGED, which we all know is done around the 100,000km mark...

This is all meaningless when it comes to buying a skiz though, as long as you have some one knowledgeable checking it out its fine.

i wouldnt pay any more than 9k for a superclean series 1 and 11k for a series 2, but thats just me

Link to comment
https://www.sau.com.au/forums/topic/225211-value/page/2/#findComment-3979655
Share on other sites

My bosses son, just bought one, series 1 with an apparent 60k km on it and guess what it had a sticker saying the TIMING BELT WAS CHANGED, which we all know is done around the 100,000km mark...

Engine swap? The body may have done 60K. But the engine may have done more..

Just a thought.. not an attack on anyone..

Link to comment
https://www.sau.com.au/forums/topic/225211-value/page/2/#findComment-3979736
Share on other sites

Engine swap? The body may have done 60K. But the engine may have done more..

Just a thought.. not an attack on anyone..

nah the engine was original, i dont know of any legit 60k km old rb25de's that died that early, they dont have the power to break themselves especially at that age...

regardless the interior told the story, worn seats, steering wheel and handbrake, definately not a clean example

Edited by R34GTFOUR
Link to comment
https://www.sau.com.au/forums/topic/225211-value/page/2/#findComment-3979939
Share on other sites

yeah lads,

The time the our cars idle in japan ..

skylines are probably doing around 200000km anyways...

in saying that, i drive my skyline approx 150km per weeek.... so it is possible for some JAPS to drive less.

but defintely, some are wound back, no doubt.

Link to comment
https://www.sau.com.au/forums/topic/225211-value/page/2/#findComment-3979969
Share on other sites

im selling my car atm which is a R32 with a s1 r33 rb25de with vct motor in and all det running gear.

has some suspension work done to it already (coilovers,castor rods, whiteline & gtr swaybars, poly mounts)

i only want to sell it for $9000neg so if anyone is interested send me a pm :D

Link to comment
https://www.sau.com.au/forums/topic/225211-value/page/2/#findComment-3980702
Share on other sites

Just to throw it out there..as its topic related :P

selling my series one r33 gts, weird charcoal grey- black- purple pearl colour (kn6)

117,000kms, splitfire coils, performance spark plugs, 2.25 inch exhaust and twin tip canon

very dark tint, up to date with services, immaculate interior and engine bay.. Showroom tidy (just about)

located in adelaide, will drive interstate..

open to offers, post up price on here or pm

cheers

post-45804-1215357395_thumb.jpg

post-45804-1215357993_thumb.jpg

post-45804-1215358098_thumb.jpg

post-45804-1215358181_thumb.jpg

post-45804-1215358261_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/225211-value/page/2/#findComment-3996100
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have a look at that (shitty) pic I posted. You can see AN -4 braided line coming to a -4 to 1/8 BSPT adapter, into a 1/8 BSPT T piece. The Haltech pressure sender is screwed into the long arm of the sender and factory sender (pre your pic) into the T side. You can also see the cable tie holding the whole contraption in place. Is it better than mounting the sender direct to your engine fitting......yes because it removes that vibration as the engine revs out 50 times every lap and that factory sender is pretty big. Is it necessary for you......well I've got no idea, I just don't like something important failing twice so over-engineer it to the moon!
    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
×
×
  • Create New...