Jump to content
SAU Community

Recommended Posts

hey there,

i have the oppertunity to offer members HID kits at a low price, these kits a plug and play kits and include all the brackets and fittings for fitment.

these are available i a wide colour range - 4300k,5000k,6000k,8000k,10000k,12000k

colortemperatures.jpg

Picture of the standard Kit:

hid.jpg

Picture of the Hi/Lo kit:

hilo.jpg

1-2.jpg

11-1.jpg

================================================================

Name List:

=================================================================

Bank Details

ANZ

Acc Name. Dion Coulls

BSB . 012551

Acc No. 483047064

=================================================================

Prices.

I will put in a cut off date/time for this group buy so that people will not be waiting for numbers to be filled, once the numbers are sufficient.

But i invite anyone to ask there mates if they are interested in buying also.

PLEASE SPECIFY WHICH BULB TYPE AND TEMPERATURE RATING YOU NEED IN YOUR POST or PM.

If there is 10 or more buyers

1x HID Kit To suit H1/H3/H4(single, Please add $15 for Hi/Lo option)/H7/H11/HB3/HB4/9007

Including Postage ANYWHERE in Australia

$ 170.

25 or more

1x HID Kit To suit H1/H3/H4(single, Please add $15 for Hi/Lo option)/H7/H11/HB3/HB4/9007

Including Postage ANYWHERE in Australia

$ 160.

and if it reaches 50 sets or more

1x HID Kit To suit H1/H3/H4(single, Please add $15 for Hi/Lo option)/H7/H11/HB3/HB4/9007

Including Postage ANYWHERE in Australia

$ 155.

I can supply White T10 Wedge parkers for aditional $10 / pair

If there are any issues with the kits I will do my best to replace parts under warranty just the shipping to and forth can take up considerable time if there is any failure to the parts.

If you have any questions or quieries dont hesitate to ask

Link to comment
https://www.sau.com.au/forums/topic/225507-hid-kit-group-buy/
Share on other sites

  • Replies 129
  • Created
  • Last Reply

Top Posters In This Topic

i have this same Kit from a group buy on the R31skylineclub Angry ran that group buy im sure youve got the same contact,

any ways top kit looks great :) if that helps anyone decide out the quality

i have this same Kit from a group buy on the R31skylineclub Angry ran that group buy im sure youve got the same contact,

any ways top kit looks great :) if that helps anyone decide out the quality

Yeah i seen his group buy there but i didnt want to cut his grass, mine are cheaper to :cool:

and Whyallapunk, im not to sure i think it depends on the year of your R32 to which globes you have

i dont know that there any good for parkers i have a bunch of those already maybe i should try one out

why i say there no good id LED isnt multi directional beam i have these in atm but want something brighter

b4c016cf65c34dae5597d212cc18e519.jpg

but want something like this

12xLEDparker.jpg

Min maybe we can combine shipping and when we catch up next i can give your your globes

go out and pop your bonnet on top of your lights should tell you what type that are and there wattage

ah good point i don't want another kit for my high beams so i can run a relay and have 4x HID power muhahahahaa but yeah that wont be too soon as doing a clutch and install then other things first

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...