Jump to content
SAU Community

Recommended Posts

Heres the question...

i got a budget of around $800 - $1,000 give or take a hundred or so for a system for my r33... what you guys rekon i do? i'm talking the works, if subs where, where for the amp, how many speakers, etc... what would you guys do in my case...

i already got a deck- kenwood.... 50w x 4 blah blah blah... seen it in JB-HIFI for $499... nothing drastic in that... bought it when i got my car about 2 months ago not knowing what i would do (if anything) to the audio system for the future... the stock skyline speakers are finished, gone, done...

so what you guys think i should do? just interested in afew suggestions diff to mine...

Link to comment
https://www.sau.com.au/forums/topic/22557-advice-for-a-sound-system/
Share on other sites

When talking high quality systems that includes a sub and amp, a $1000 budget is a little small even given the fact that you have the deck.

But if that is the absolute maximum I'd suggest this (which is one we have done many times too just quietly)

Boston FS-60 6" splits at the front (doors and kicks)

Audison SRx4 amplifier

Jl 12W0 subwoofer

Stinger cable.

You would probably end up spending $1200-$1400 when you factor things like installation and sound deadening in but I tell ya what, the end result would be well worth it. :O

if you never plan to run subs, you can get a good set of splits and a pair of 6x9s and a small 4 channel that will do the job. A very cheap stereo i did for a guy, 1 x Alpine Type S Dual voice coil, 1 Alpine M200, Wireing kit from Autobarn and a set of cheap splits running off the head unit that was in hte car, cost, $600 neat, but that was building the own box out of timber that he supplied. It goes off its head too, the box is ported btw

Garys Car Radio - High St, Preston

For around $1100 I got (installed in my old vl)

2 x Clarion 10" Free Airs

2 x Clarion 6" Door Splits

1 x VNET2100 AMP (For Subs)

1 x VNET450 AMP (For Splits)

1 x Custom sub box install with 2 x 3" port holes to the parcel shelf. This was the best sounding stereo system I had heard for its price. It would outperform installs of 2k+

I already had my own head unit (just like u)

Yeah Fhrx has the idea,

Buy the best stuff you can afford, even if you need to lay buy.

AMP, SPliTS and Sub. Buy them in that order.

I wouldn't recommend a wiring kit for a Skyline, you don't need half that shit.

You'll need RCA cables long enough to go from the front to the back. About a metre of BIG power wire and a Metre of BIG earth. (get the same size)

And you'll need speaker wire to run from the amp back to the front speakers.

Check out the other threads in here.

Hey guys, just starting to look into the audio thing, so pretty unsure of all the specifics, but... can someone simply explain the concepts of chanels on an amp with reference to simply powering a sub. I was originally thinking of just putting in coax 6" in the front (or 6.5") and 6x9's in the the rear shelf, but i think i am turning away from the 6x9s and go the sub. I am at this stage just planning on having an amp for the sub, and just run the components off the head unit. Basically i want to check that there is no point in getting a 4 channel amp just for the sub, and what the consensus is on component speakers and needing their own amps. Bit long winded, probably as a result of me not really knowing much on the topic.

Cheers.

ofoofoo .. sub is always best for bass .. can't be beat with normal speakers ... if u're stuff for space ... go a 10" ... as for amp ... if its just for bass .. then get a monoblock amp ... they are designed just for subs and they are much more efficient for subs than a normal amp so u win with price/performance there ... i'm currently running my splits of the head unit right now and it works pretty good ... but if u really want it to sound good then get an amp ... an example of a good cheap system would be a cheap alpine monoblock ... about 300 ... 10" alpine type S ... thats about 150 maybe .. 50 for the sub box if u make it urself ... that will give u good bass ... forget the back speakers ... spend big on the fronts ... that will be a killer system .... good luck

Cheers hippy. Hopefully will spend my money in the right places - looking at DLS stuff. i think if i am going to spend the cash on decent speakers, should probably go an amp for the fronts. hoping to do it all for about 1600 (including head unit). i'll let you know.

cheers, was thinking car toys. Dont really know of anywhere else which has a good range of quality speakers (i need to check out some place called GT audio or something also). Have worked it out with friend - looking at two CA20 amps (1 x 170 WRMS), a classic series 12" sub, and hopefully the Reference series 6.5" components for front. add a couple of hundred for wiring/box, and with a bit of bargaining looking probably at $1700-1800. Then there is just a whole heap of work to do.

at the moment i cant do much but sit at home (doctors orders), but yeah i will come out (to a cruise) at some stage. Once i add some more stuff.. :D oh mine is black - absolute washing pain in the arse; true to what they say, the first black car you own tends to be the last black car you own.

$1000 isn't gonna buy you much in terms of quality really...but i guess what i'd do is

alpine type R splits or some focal polykevlar's 2nd hand - $350/300

or some Hertz splits new ~ $300

2nd hand Alpine Type R Sub or some RF punch's- $250

$100 for wiring and sub box building (4Ga)

Vnet 4100 2nd hand Amp - $300

or jaycar 4x100rms amp

no rear speakers, no point.

$1000 exactly

put in 100rms into each speaker, and put 200rms into the sub

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Has equal chance of cleaning an AFM and f**king an AFM. I think you can work out what happened. When the Hitachi ECU sees the AFM die and goes into the associated limp mode, then it will start and run just fine, because it ignores the AFM and just runs on idle maps that will do what it needs to get it going. But there is no proper load signal, so that's about all it can do. My suggestion? If you don't want to go full aftermaket ECU, then get some R35 GTR AFM cards and some housings to put them in, in the stock location, and Nistune the ECU. Better to do a good upgrade than just replace shitty 40 year old tech with the same 40 year old tech.
    • So my car was recently having trouble starting on initial crank, I would need to feather the gas for it to start up but besides that it would start and run fine. So I clicked the idle air control valve (with throttle body cleaner) and cleaned the MAF sensors (with MAF cleaner). The start up issue was fixed and now the car turns over without the assist of the throttle, but the car is in limp mode and wont rev past 2.5k RPM. From what I understand the IACV would not put the car in limp mode, so I am to believe it is the MAF sensors, but it was running fine before and now I cant get it out of limp mode. I cleaned the MAF made sure the o rings were seated properly. Made sure the cables were plugged in properly, the cables also both read the same voltage. Does anybody know why this is or what could be causing this or how to get it out of limp mode?
    • Ooo I might actually come and bring the kids, however will leave the shit box home and take the daily
    • Thanks. Yeah I realised that there's no way I'd be able to cover the holes with the filler, it would just fall through. Thanks again @GTSBoy!
    • That was the reason I asked. If you were going to be fully bodge spec, then that type of filler is the extreme bodge way to fill a large gap. But seeing as you're going to use glass sheet, I would only use that fibre reinforced filler if there are places that need a "bit more" after you've finished laying in the sheet. Which, ideally, you wouldn't. You might use a blob of it underneath the sheet, if you need to provide some support from under to keep the level of your sheet repair up as high as it needs to be, to minimise the amount of filler you need on top. Even though you're going bodge spec here, using glass instead of metal, the same rules apply wrt not having half inch deep filler on the top of the repair. Thick filler always ends up shitting the bed earlier than thin filler.
×
×
  • Create New...