Urgent: Need Help!

[Dan_AE86]

hey SAU,

just read through an old thread http://www.skylinesaustralia.com/forums/In...c-s-t99783.html about installing a greddy profec B spec 2 into an R33...

Im guna try and do mine this weekend and just needed a bit of help...i think all i have to do is connect ign 12v to the main unit+tap into the fuel pressure regulator hose+mount the soliniod as close to the turbo and run the wires from the main unit to the soliniod......Then its THE BIT IM STUCK ON, how to do the actuator hoses.

DO I:

- just take the line off the actuator and put it into the NO then out of the COM onto the actuator?thats what it says in the manual but is it the same for the r33 (do i have to plug up the intake like in the manual?where is that?do i have to do anything to the stock solinoid/hoses not used?)

Does anyone have Pics at all??

Any Help Would Be Great!

Dan.

[joeleo87]

yeh just follow the manual dude, tis what i did and mine works mint.

i know in the mannual it says to have the other hose goin on to a preassure source ie on the intercooler pipping but u can just connect it to where the actuator hose went

[boostin_r33]

hey dude better off taking it to a dyno and gettin it setup their should only cost 100 bucks just let him know what u want as hi and low! but yeah it should be in the manuali'll have a check for ya!

[boostin_r33]

do you have a internal wastegate? if u do!!

you connect a line from the wategate to the com,

you connect a line from no to a pressure source (intercooler piping etc)

Let us know how you go

[GeeTR]

I coulda swore OP had another thread about this