Jump to content
SAU Community

So How Does A Stagea Drift?

yokotas13
 Share

Recommended Posts

yokotas13 Mentor

yokotas13

Posted
Posted

Very well.

It needs at least 375-400hp

350 is not enough. its soooo heavy, even with 225/40 on a 9.5j with 50PSI i couldnt keep em spinning with TONS of clutch kicking to help unless i was at the top of hte rev range the whole time (like above 5k entering the initiation)

gtr brake upgrade is plenty to not have any brake fade for at least 15 minutes (sessions are 15 minutes each)

i stopped breaking axles, so thats good

anyways, its much more predictable than say a 180 or s13 or so. i really like it

videos will be up along with pictures, i think someone get some snaps of me

Link to comment
https://www.sau.com.au/forums/topic/225687-so-how-does-a-stagea-drift/
Share on other sites
unique1 Mentor

unique1

Posted
Posted (edited)
Very well.

It needs at least 375-400hp

350 is not enough. its soooo heavy, even with 225/40 on a 9.5j with 50PSI i couldnt keep em spinning with TONS of clutch kicking to help unless i was at the top of hte rev range the whole time (like above 5k entering the initiation)

gtr brake upgrade is plenty to not have any brake fade for at least 15 minutes (sessions are 15 minutes each)

i stopped breaking axles, so thats good

anyways, its much more predictable than say a 180 or s13 or so. i really like it

videos will be up along with pictures, i think someone get some snaps of me

in for vids mate, sounds great, so are u still running the gtr 5 speed and 4wd front diff in place as per rs four specs yes? just with a removed front shaft to stop the 4wd workin? i would love to give mine a proper go but was worried the front end is too heavy and will tend to understeer alot. I have the power but its not a very smooth transition when sliding ive found, i think im going to change coilovers soon these ones are doing my head in to be honest.

abit offtopic i know but do u know which companies make coilovers for the 260rs models still?

now get those pics and vids up, i think your stagea is one of the hottest ive seen with such a subtle and a not over the top bodykit like some kits around

have u thought about throwing on a rb25 rwd sump and a gtst 5 speed box instead? i noticed when checking specs of the stagea models and the rs four is 1620kg and the rsx with the rwd rb20e only says it weighs 1430kg, thats a huge weight saving, though im unsure how true this weight is

Edited by unique1
Lil_Bobby_260 Mentor

Lil_Bobby_260

Posted
Posted

love to see the vids as well!

Would like to do a similar look with the ride height and wheels to my stagea, but not sure how well that would go down...

Ive taken mine for a lil bit of a slide and i agree with the predictability - its easy to anticipate what the car is going to do. I like it. Slides well til the atessa torques up the front and pulls you straight. The 4wd stageas have hicas, too...? Are you running a hicas lock or anything?

yokotas13 Mentor

yokotas13

Posted
  • Author
Posted
in for vids mate, sounds great, so are u still running the gtr 5 speed and 4wd front diff in place as per rs four specs yes? just with a removed front shaft to stop the 4wd workin? i would love to give mine a proper go but was worried the front end is too heavy and will tend to understeer alot. I have the power but its not a very smooth transition when sliding ive found, i think im going to change coilovers soon these ones are doing my head in to be honest.

abit offtopic i know but do u know which companies make coilovers for the 260rs models still?

now get those pics and vids up, i think your stagea is one of the hottest ive seen with such a subtle and a not over the top bodykit like some kits around

have u thought about throwing on a rb25 rwd sump and a gtst 5 speed box instead? i noticed when checking specs of the stagea models and the rs four is 1620kg and the rsx with the rwd rb20e only says it weighs 1430kg, thats a huge weight saving, though im unsure how true this weight is

yep just have a front driveshaft removed, thats it.

everything else is stock. im about to eliminate the attessa shit in the back but just gotta find time.

I was having a problem with understeering, but i just went to lower front and higher rear tire pressure and lowered hte damper setting on the front a few clicks and it pretty much stopped it.

not doing that much work with changing engines and shit. too much work with not enough effort

the car is 3700lbs...100 lbs isnt going ot make a shit bit of difference in drifting.

up next?

2617370105_f43551c441.jpg

watch out pedestrians

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...