Jump to content
SAU Community

Hanbrake Light Stuck On

FATAZZ
 Share

Recommended Posts

FATAZZ Grand Master

FATAZZ

Posted
Posted

Hey,as above when i release my handbrake the red light on the dash stays light up like its still on.

Is this a common occurance with r32's?

It still drives normal,just now i have the hicass light and handbrake light both on while driving now

hicass isn't a problem though(lockbard)

should i get it fixed urgent or is it just a bung light/wire?

cheers

Link to comment
https://www.sau.com.au/forums/topic/225864-hanbrake-light-stuck-on/
Share on other sites
FATAZZ Grand Master

FATAZZ

Posted
  • Author
Posted
the handbrake light on the dash links to the brake fluid reservior as well- make sure there is enought fluid - could also be a faulty connector on the reservoir or handbrake etc - hicas light could be related not sure though havent had this issue myself

Thanks Shaun,you were right first off, low on brake fluid.

Mods can delete now if wanted.

FATAZZ Grand Master

FATAZZ

Posted
  • Author
Posted

nah,hicas light stays on because i disconnected it along with all its components and put a lockbar inplace.

the hicas light being on is normal,was just saying because 2 red lights on the dash doesn't look good let alone 1.

FATAZZ Grand Master

FATAZZ

Posted
  • Author
Posted

with my work ute(hilux) the mechanic said when the brake fluid is low it means the brake pads

are running thin.

Could it be the same case with the skyline even though i haven't really felt a loss of brakes so far?

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
with my work ute(hilux) the mechanic said when the brake fluid is low it means the brake pads

are running thin.

Could it be the same case with the skyline even though i haven't really felt a loss of brakes so far?

You should be able to noitce to the point where it takes a long time to stop.

If your brake fluid is low, check your brake pads. Machine your disks and put new pads in and the fluid will go back up. You might need a slight top up tho.

Thats the only thing I can think of unless you run a Diagnostics of the car to see where the error lies in the electrical system.

.:: GimpS-R34 ::. Grand Master

.:: GimpS-R34 ::.

Posted
Posted

had any dvd installed? or dash come off?

when i had my dvd installed they tap into your handbrake (by law) so the screen turns off when it's down.. and my handbrake light stayed on even though the handbrake was down..

either that or a wire has fault maybe? a point to check on

FATAZZ Grand Master

FATAZZ

Posted
  • Author
Posted

Ill take it for another drive tonight double check the brakes then,

ill take a wheel off and check the meat on the pads.

Nah,no dvd player or dash installs.

see how i go.

Im thinking its just a simple wire coming loose..Your probly right Craig.

FATAZZ Grand Master

FATAZZ

Posted
  • Author
Posted

Hey,i went for another drive thisarvo and the light went off as soon as i dropped the handbrake,just must of needed

abit more time for the 'thing' to acknowledge i put more brake fluid in.

Thanks everybody for your help,much appreciated :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R33 GTST Sh*tbox to Polished T*rd

      By Duncan · Posted

      Nice, thanks for sharing your progress....that's a pretty long list you are putting into it!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Decided to upgrade my pressurised plastic coolant expansion tank for a fancy pants alloy version The OEM versions can get brittle, even the new plastic one I got when I first got the car is a starting to show signs of "stress" I wasn't cheap, but it is basically unbreakable
    • pacman_1219
      RB25DET Neo Rebuild

      By pacman_1219 · Posted

      Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Yeetus
      R33 GTST Sh*tbox to Polished T*rd

      By Yeetus · Posted

      Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • GTSBoy
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By GTSBoy · Posted

      Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
×
×
  • Create New...