Jump to content
SAU Community

new job, new car = what do i do now


Recommended Posts

Do you have a link to the sequential shifter ? Who is it made by ?[/quote:def2f15f09]

http://www.takakaira.com/

click on performance parts on the left then go down list and click on IKEYA Formula thats who it's made by I think it came to about $A2600+ postage

Guest 33GTS25

jay51, the shifter made by 5zigen also looks impressive and as it converts your gearbox to a tiptronic type setup may be more appropriate for drag racing albeit a little more expensive but remember i am prepared to spend the extra time and money to build the car to the specs that i want not just a hurried project. i have also decided on the colour scheme because i am somewhat of a show pony and like loud colours. the colour will be miura green pearl which you may or may not have seen in the press releases for the murcielago when it was released in geneva. if someone could tell me how to attach a picture i could post one here for you to gawk at.

rod

Yeah I saw that one too, maybe later on.

To post pics you need a web site, the web space provided by your ISP will do. then you need a program such as FlashFXP which you use to upload pics from your harddrive to your webspace. When you want to post a pic you go to your site and copy the url of your pic into your post.

it's easier than it sounds, given a bit of practise.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...