Jump to content
SAU Community

Intercooler N Exaust

r33_crusier

By r33_crusier,
in South Australia

 Share

Recommended Posts

r33_crusier Enthusiast

r33_crusier

Posted
Posted

ey guys need some help on wat do, im stuck.

my next thing on my 33 is to get my exaust done, ive been quoted 1050 dollars for a 3" stainless turbo back exaust? wat does everyone reckon, good price? should i worry about stainless or jst go mild steel? or does any one have ant bolt on kits that i could buy or get from somewhere???

also for my FMIC wat should i do, found a cooling pro kit that connects straight up to the stock intercooler pipes. i dunno wat i wanna do, how easy is it to fit these after market FMIC in the stock front bar of a r33 series 2. Any one have any hints or tips for installing them.

Thanks For the help guys

Adam

Link to comment
https://www.sau.com.au/forums/topic/226415-intercooler-n-exaust/
Share on other sites
Damo_R34 Grand Master

Damo_R34

Posted
Posted

Id have a look through the trader section for exhuasts, there are quite a few who supply a wide range of exhausts. As for the cooler, i just fitted my type 2 cooling pro kit. Jenkies had to make custom brackets for it, but other than that, no problems at all!

Nightcrawler Grand Master

Nightcrawler

Posted
Posted

Sounds like a good price, but does it include a high flow cat? Stainless muffler or resonator? Do you know exactly what it is going to sound like? And what volume it is going to be? If the price difference isn't massive I would go stainless every time, as it will last a lot longer. If you want to be prudent, get them to change over your turbo exhaust housing studs while they do the job - can save you heartache down the track.

I have the cheap-ass JustJap intercooler and it works great. Not sure if it is cooling pro or not. If the one you are looking at hooks up to stock pipes then I would assume not. The big problem with a cooler that joins up to stock pipes, it that it presumably has a long pipe running the length under the intercooler back the the stock pipes - these can hang below the level of your bumper bar. If the one you are looking at doesn't have that pipe, then they are bugger to install - you have to cut a hole in your engine bay wall for the return pipe, lose your air snorkel, and trim your clutch fan blades.

Either way you are almost certainly going to have to trim your reo bar, and will definitely have to trim the inside of your bumper bar, to fit the cooler in. These are not difficult jobs, but not for the faint-hearted either. If you are not pretty strongly mechanically inclined, then I would pay someone to fit it. A pile of SAU people had a go at installing a members intercooler one afternoon recently, and from memory didn't actually complete the project within a day :D

nos man Mentor

nos man

Posted
Posted

yeah like nightcrawler said! i think i was quoted just under 2k somewhere for exhaust, it included a cat, resonator and a muffler! but it was gonna be abit loud, i think the last r33 they tested was like 96-97 db with the same exhaust! i wanted it quiet so i shopped around and pick up a jazma 3" cat back for cheap as chips! got a 3" xforce front/dump real cheap as well! i then picked up a 3" high flow cat from an r34 for like 50 bucks! but i ended up decating my own cat but all up i spent around $500 on my exhaust system! just shop around if you don't wanna pay that sort of price

as for the fmic! i have never run into one which just fits directly without any modifications! i always ended up bending pipes and adding some on

r33_crusier Enthusiast

r33_crusier

Posted
  • Author
Posted
Sounds like a good price, but does it include a high flow cat? Stainless muffler or resonator? Do you know exactly what it is going to sound like? And what volume it is going to be? If the price difference isn't massive I would go stainless every time, as it will last a lot longer. If you want to be prudent, get them to change over your turbo exhaust housing studs while they do the job - can save you heartache down the track.

I have the cheap-ass JustJap intercooler and it works great. Not sure if it is cooling pro or not. If the one you are looking at hooks up to stock pipes then I would assume not. The big problem with a cooler that joins up to stock pipes, it that it presumably has a long pipe running the length under the intercooler back the the stock pipes - these can hang below the level of your bumper bar. If the one you are looking at doesn't have that pipe, then they are bugger to install - you have to cut a hole in your engine bay wall for the return pipe, lose your air snorkel, and trim your clutch fan blades.

Either way you are almost certainly going to have to trim your reo bar, and will definitely have to trim the inside of your bumper bar, to fit the cooler in. These are not difficult jobs, but not for the faint-hearted either. If you are not pretty strongly mechanically inclined, then I would pay someone to fit it. A pile of SAU people had a go at installing a members intercooler one afternoon recently, and from memory didn't actually complete the project within a day :laugh:

cheers for all the reply guys

as for the quote it was for a 3" stainless dump pipe, that has the 2 seperate pipes for wastegate and exaust gases, a 3" high flow cat, and a 3inch piping while ill keep my cannon at the back, i was wanting it to keep the same/similar sound as it has now as its not to loud and sounds alrite atm, jst need the flow casue it kinda feels restriced at higher rev ranges. I think ill jst try find a FMIC and get soem1 to install it casue cbf tryin to cut the stuff on the inside of the front bar i dont wanna stuff it up.

Nightcrawler Grand Master

Nightcrawler

Posted
Posted

That price sounds really good for a split dump, high flow cat and 3" stainless right through including install! A stainless split dump is $250-$300 and high flow cat $200-$300 on their own.

r33_crusier Enthusiast

r33_crusier

Posted
  • Author
Posted
That price sounds really good for a split dump, high flow cat and 3" stainless right through including install! A stainless split dump is $250-$300 and high flow cat $200-$300 on their own.

yea well this guy at streamline down at newton, all my mates got there's done there so he said hed do it cheap, plus id had my other cars done there 2

ISC-Performance Veteran

ISC-Performance

Posted
Posted (edited)

Hey bud, we are located in SA and can supply you with an ISC full intercooler kit for $399, you can also go a Trust spec LS for $679. As for exhausts our jap brand cat backs start from $750 +. We can also supply greddy front/dump pipes etc.

Ryan-0413804117

Edited by ISC-Performance
DSTROY Grand Master

DSTROY

Posted
Posted
Hey bud, we are located in SA and can supply you with an ISC full intercooler kit for $399, you can also go a Trust spec LS for $679. As for exhausts our jap brand cat backs start from $750 +. We can also supply greddy front/dump pipes etc.

Ryan-0413804117

Hey Ryan,

Could you please PM me a price for a Greddy front/dump pipe for a 32GTR, im getting new turbos, so looking to upgrade.

DIOR 33 Veteran

DIOR 33

Posted
Posted

Mark at Exhaust Technology did my exhaust on my other cars and you dont need s/steel m/steel is fine he will tell you that anyway spend your money on the rear box nothing cheap china made either go for something like a 3" racing spiral JUN.BL with hi-flow cat no rezy and your 33 will sound awsome i promiss

Luciano Veteran

Luciano

Posted
Posted
yea well this guy at streamline down at newton, all my mates got there's done there so he said hed do it cheap, plus id had my other cars done there 2

Nigel does some quality work there at streamline. He usually does all the pipework and fabricating from scratch from what i've seen, which is probably why youve been quoted that much.

I reccomend his work for sure!

He actually worked on my corolla exhaust last weekend after somehow mysteriously blowing the rear muffler :D

jrm Veteran

jrm

Posted
Posted

Another +1 for Nigel at Streamline.

He fixed up the loose exhaust manifold for my R34 back a few weeks ago, great guy to deal with - seems very genuine and was happy to show me around the car and what he'd be doing, etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...