Jump to content
SAU Community

Recommended Posts

so i used the search tool and it hasnt been covered yet.

ive got a rb20 s13 and it idles at 1500revs and when i drive it, the revs go up so fast, and it feels as the car can go faster but the rpm meter will goes to red line, and it feels as if its not getting full power. like ill be at 70ks and the rpm will read 4000k??? WTF!! anyone have any ideas?

engine is stock but has all the usual stage 1 mods like bov, zorst and all the things ricers usually buy first

Link to comment
https://www.sau.com.au/forums/topic/226710-idling-high/
Share on other sites

Slipping clutch maybe?

If you put the car in 4th or 5th gear while doing 60-70km/h and put the throttle to the floor, does the car just rev out but not gain any speed?

Or you've bodged a tacho output signal wire somewhere.

Edited by _x_FiReStOrM_x_
Link to comment
https://www.sau.com.au/forums/topic/226710-idling-high/#findComment-3992566
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...