Jump to content
SAU Community

Recommended Posts

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

dont worry sketchr30 i retired my ti at 407000k's but she still fires up first time even with old pump fuel in her, the rest of her has seen better days through.

nicko when you say import head lights what do they look likem, ( does your car have a grill or two little slits)?

if u want a brake upgrade a cheap option is to find 4 pot calipers off an old (79-83) toyota four runner

apparently they bolt straight up to r30s, 260z's etc

when i can source a set this is what i'll be doing, then maybe some konis and appropriate coils.

cram an rb20 in for less than 2k

fix up driveline for another 1k

say 1....1.5k on cooler injectors what have u

should be a good little package to keep up with r32's/33's

i'm looking for an r32 gtst front cut right now so after i get it re registered it'll go straight in...then worry bout eng certificate later

http://community.webshots.com/scripts/edit...security=NIXjvs

have a look at these as they are the latest pic of my car still some work to be done though but its all about the love!

if i'm still logged in at this link then go to slideshow and theres other pictures?

Not for sale, at the moment, if your refering to the photos of my car then they are more trouble than there worth, they were fill of water and rusted (ever tryed to get parts for tail lights before) had to butcher my ti for the wiring and light fixtures.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...