Jump to content
SAU Community

Recommended Posts

34 GTt's are 206kw flywheel stock (take about 7 or 8 kw for auto so ~198kw) and i dont think you would lose that much to the wheels without any mods. so with those mods its definately low. Did u get ur car from ur mates yet ??

Yeah I got the car back into Hyperdrive yesturday they think the fuel pump may of died or it was a dodge connection.

I still have the dyno sheets in the car but it shows a lot of flat spots. That's why it was very jerky to drive.

sometimes hyperdrive tend to tune the cars wayyy too safe, that could be it.

did u ask hyperdrive why it was reading low?

when allstar open back up maybe take it there?

Hyperdrive didn't say why it was that low. They said that they were going to put back on the dyno when they fix the fuel pump

If it doesn't change I may take it to allstar.

Boost controller could be making it jerky to drive, mine was jerky coming on boost till I had another fiddle with the ebc. It would come on hard then 1000rpm later it would kind of hesitate for half a second then pull hard again.

I dropped down the pressure it holds the gate shut till by 0.2 and it made a huge difference, really smooth and still pulls just as hard.

I just spoke to Hyperdrive on the phone, they said that another R34 was getting the ecu tune yesturday at the same amount of boost not sure what mods it had but it pulled a 220rwhp and it was a manual. Which is another 6wrhp than I pulled.

i have pretty much the same mods but a simple Safc2 rising rate fuel reg plus a front pipe. had my 98 34gtt auto tuned at performance unlimited and it made 218.4kw at the wheels.(292.9rwhp) was tuned at 10psi, power curve was ok but thats all you can get with a safc2.

hope you have better luck once your pump is fixed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...