Jump to content
SAU Community

Anyone Interested In A Hills Cruise?


rhys5169
 Share

Recommended Posts

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

Nah seriously if you wanna do a sunrise cruise, 5ish is probably a good start time. And maybe cruise out to the barossa or maybe the back way to Murray Bridge where your facing the sun (bring ya sunnies ;)) so we can cruise along with all the 'lines and see the sunrise :)

For a proper hills run, yeah 3ish :(

Edited by AndrewJZX100
Link to comment
Share on other sites

i'm keen for an early morning cruise through the hills. sunrise is normally around 630-7 so kick it off around 5-530 and it will be wicked. i'm normally up then anyway.

Link to comment
Share on other sites

has anyone actually driven on an icy road in the hills?

ive lived in the hills all my life and been on my far share of early morning cruises and have never hit any ice on the road.

i did hear that it happened on the freeway once near crafers, but that was after rain aswell. i would be one of the first to say that if it is raining that it isnt the greatest idea to go fanging through the hills and i think that is more of a consideration than ice.

Link to comment
Share on other sites

lol, black is is what your tyres feel not what you see.....explanation below:

"Black ice, also known as "glare ice" or "clear ice," typically refers to a thin coating of glazed ice on a surface, often a roadway. While not truly black, it is transparent, allowing the usually-black asphalt/macadam roadway to be seen through it, hence the term. It is unusually slick compared to other forms of roadway ice.

Because it contains relatively little entrapped air in the form of bubbles, black ice is transparent and thus very difficult to see (as compared to snow, frozen slush). In addition, it often is interleaved with wet road, which is identical in appearance. For this reason it is especially hazardous when driving or walking because it is both hard to see and unexpectedly slick.

Bridges and overpasses can be especially dangerous. Black ice forms first on bridges and overpasses because air can circulate both above and below the surface of the elevated roadway, causing the pavement temperature to drop more rapidly. This is often indicated with "Bridge May Be Icy" warning signs.

Black ice may form even when the ambient temperature is several degrees above the NTP freezing point of water (0°C) if the air warms suddenly after a prolonged cold spell that leaves the surface of the roadway well below the freezing point temperature.

The term black ice is sometimes used to describe any type of ice that forms on roadways, even when standing water on roads turns to ice as the temperature falls below freezing."

Link to comment
Share on other sites

i've had a run in with (black ice) not too sure if it was! but i use to work at a vineyard in the hills and drove out there at 6 in the morning and i hit this bit of road where you park! i broke and it slowed a little but slid straight into another workers vk commy! not fun

Edited by nos man
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Go to SP mufflers and get the muffler of size you want and make a nice mid muffler. It's about that simple! I have 2x 3.5 Magnaflow straight through Mufflers and while it's pretty loud with the Varex open, it's quiet enough with the Varex closed. You can also buy off the shelf Magnaflow straight through mufflers as well. You also have a turbo to quiet the car down too. Don't overthink it. Buy my extra Magnaflow muffler sitting on a shelf doing nothing (buy it new, ignore this part)
    • Centre-offset muffler under the floor, same as stock. Just....3.5". The change from straight pipe there to centre-offset will mean that you need to remake some of the pipe (add a bend or two).
    • Hey guys. So my R34 GTT has a custom 3.5” exhaust (done by previous owner) with a high flowing cat, and then just a Varex cannon muffler on the back. The car does drone alot and is really loud even on highway driving just cruising, as you can imagine due to the Varex muffler basically being a straight through with the valve open. As much as i love a loud RB, it can be a bit much with no other muffling in line and just driving casually. I wanted to lower the volume output on the exhaust a bit, as well as remove the drone (probably a way to do both at once), and was going to do it all myself as I am a fabricator and have done exhaust work in the past, so the fab work isnt my issue, im just not sure on the right product or type of product to use to get the job done, and i doubt an exhaust shop would be wanting to help me as they wont be making any money from helping me, unless they supplied the product? Anyway any help or guidance in best way to approach this would be awesome   Thanks in advance
    • Meh, whilst the Honda is a "really" good car and has potential if you want to drop coin on, it was uninspiring for me to look at, but, it did serve its purpose and is now in the boys hands, his happy, his girl is happy, as she wasn't to keen on the noisy old Patrol, and most importantly, the Minister for War and Finances is extremely happy that her "little baby boy" (6'2 nugget who is currently training to be a copper, which will make 3 coppers in the immediate "circle of trust") has a well sorted reliable car that doesn't guzzle diesel Me, I'm more than happy with the NC MX5 that I replaced it with, it's a fun little car that I like looking at, like driving, and yes..... I do like the fact that the maintenance and modifications that I have done/will do are plentiful and relatively cheap, well........ while staying naturally aspirated slow that is, and that's all I really need for a fun little daily, I can rev the 5hit out of it rowing through the gears and never really break the speed limit  In saying that wicked word, "modifications", I've already ordered something for some noise and an additional "3 ish" horse powers, or whatever it gives, in the form of a header, and, a new set of "cheapo" BC coilovers that are already sitting in the shed waiting to get put in, I had the same BC's in my old NB and found they were fine for the street, hwy, and the occasional track days I did in it, they have 6kg front and 4kg rear springs which is about 10% stiffer than the stock springs which I found worked well for their price  I've also already been in touch with MX5 Mania in Dural, so once the header is on it will get a ECUTek RaceROM tune there (I cannot rev match for 5hit, and I loved the RaceROM rev match and FFS in my old 86 "RIP") In other, maintenance news, I put some new sparkler plugs in it, and have a new set of DBA Street series pads to put in over the next day or so, I'm running the DBA street series in the SS and Honda and really like them, they work great and are not dusty at all I've also booked in a few days leave over this weekend to give me 4 days weekend do some paint correction and give the leather seats some conditioning and interior some Bissell and steam cleaning OCD lovin', the carpet and interior looks clean, but from my experience with the Bissell IRT carpet, and the steam cleaner IRT trim, looks can be deceiving I've also found that finding a detachable hard top is proving problematic, the main reason why I didn't like the NC initially was the power retractable hard top that I seen them with gave the roof line a weird look, the detachable roof though looks good, and is a same shape as a NA/NB hard top, similar, but unfortunately not the same as it has different fixture point on the front, so fitting a easy to get NA/NB detachable hard top is no bueno New Old cars are fun, cleaning, hunting and playing around brings much joy How are your beasties going? Do you still have the Skyline with the LS???, or Barra??? that you were playing with
×
×
  • Create New...