Jump to content
SAU Community

Recommended Posts

Hi guys

Wondering if anyone could spill some beans on removing this sensor without breaking something, as we're not sure and I have to have this part out tonight! I wish I could be more descriptive but it's not me doing the removal, and I have no idea what it looks like!

Thanks in advance

Andrew

Hi.

Jack vehicle and secure

Remove wheel

Tools:

pliers

screwdriver set

10-12mm spanners, sockets etc

Follow the tube that contains the wiring that goes to the wheel speed sensor.

Assembly is about 600mm long

Undo the 3 brackets that attatch to the hub etc.

Connector is in the engine bay near the grommet it comes through.

There is one bolt that holds the sensor in the hub assy. Lever out gently using flat blade if needed.

Sensor has/had white sealant on it to prevent corrosion and you will also see an o-ring.

Hope this helps.

Cheers

Thanking YOU sir.

Hi.

Jack vehicle and secure

Remove wheel

Tools:

pliers

screwdriver set

10-12mm spanners, sockets etc

Follow the tube that contains the wiring that goes to the wheel speed sensor.

Assembly is about 600mm long

Undo the 3 brackets that attatch to the hub etc.

Connector is in the engine bay near the grommet it comes through.

There is one bolt that holds the sensor in the hub assy. Lever out gently using flat blade if needed.

Sensor has/had white sealant on it to prevent corrosion and you will also see an o-ring.

Hope this helps.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you ask just me you'll get 3 different answers.
    • Do not ever trust ChatGPT with anything math related. They can't do math. They have no idea what it is. With enough data we can fit a decent equation in Excel, or if the available fits in Excel aren't good enough, a Matlab clone.
    • You could check/calibrate that with a thermometer, we have long glass thermometers at work which go from -10 to +150°c, they are pretty cheap too I believe,  as monkey fisted soldiers tend to break them, and getting new ones don't seem to send red flags to the people that hold the purse strings Edit: after a google they apparently cost about $80, but, digital ones seem to be much cheaper at around $40
    • I should have prefaced all of this with "I'd really like to not pull anything out of the car for this" 
    • Me, I would happly spend some more coin on better tyres for my street car  Will they work, yes, of course, but why substitute some dry grip/braking distance, and wet weather grip/braking distance on what is really old tech to save some coin on your "precious" street car In the end it might not be you that farks up, it's the thousands of other idiots on the street that you need to worry about  For a street car that gets some "fun time", I have found that a quality tyre that can handle dry, wet, cold (Canberra gets pretty cold) and hot conditions, which may costs a little more, is great insurance  From my experience with them (driving around Goulburn in the winter) the RE003's are pretty poor in cold and/or wet conditions on the street If RS4's didn't hate gripping in the cold I would be running them always on the street,  great in the dry, OK in the wet, but, they do hate the cold, with a passion, I run PS5's year round now, basically, I've found the PS5 to be a great year round street tyre for all conditions, they last well, and are mid range pricing wise TL;DR. Tyre choice is probably like what brand and grade oil you should use, ask 10 people, and get 10 different answers... LOL
×
×
  • Create New...