Jump to content
SAU Community

Recommended Posts

The general idea with Illawarra and Alexander Drive is to avoid all together! Works for me. I just go around the long way, follow it to the end and get back onto Alexander Drive. Screw waiting at the lights, its a bit like going on a mini cruise by yourself :rofl:

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

The general idea with Illawarra and Alexander Drive is to avoid all together! Works for me. I just go around the long way, follow it to the end and get back onto Alexander Drive. Screw waiting at the lights, its a bit like going on a mini cruise by yourself :worship:

Maybe I'm just too tired, but..

What to the end where? Lol both ends intersect with Alexander.

Edit: And I think lights at that bit are long overdue, it was terrible before that.

Edited by s2k12

+1 for Nicholson Rd/Yale RAB and Leach/Tonkin intersection.

Also Ranford Rd near IGA (Canning Vale) so many ppl just run the intersection rather than giving way to people in the RAB.

My personal fav though is the dual lane RAB intersection Shenton Ave and Marmion. It works well in theory, but too many people just can't cope with dual lane RABs, so many accidents there!

Hutton St at the freeway entries/exits. Gets so busy sometimes, usually traffic gets banked up in one lane but not the other so people try turning across the road not being able to see if there is another car coming along in the other lane at a speed too fast for the conditions. Where do people get the idea that a green light means you are completely safe at an intersection and don't need to adjust your speed if there is shitloads of traffic banked up or even bother to check that an idiot isn't crossing when he shouldn't be?

Pretty sure the bike thing works on power too.. a mate had a 650cc dominator (road/trail) which is able to be used on a small bike license as it only had like 33kW.

Also, don't brake-check cops.. they'll do you for dangerous driving (another mate of mine got done for it).

I'm a good boy :down:

Not really an intersection, but there's a rather large pot hole on alexander drive which I hit today because the puddles were hiding it. Yay for almost ripping the tyre off.

Not a single intersection but any round abouts. . (the double lane ones)

Is it just me or does everyone on the outside lane ALWAYS cut into the inside lane and make you get really close to the roundabout?

I cant remember how many times this has happened to me and ive been forced up the curb on the inside of the roundabout. . happens just about every week. .

And like stinky rooster said, the roundabout on armadale rd. . Happens mostly there and the one further up in forrestdale (still on armadale rd)

STAY IN YOUR LANE!!!

Not a single intersection but any round abouts. . (the double lane ones)

Is it just me or does everyone on the outside lane ALWAYS cut into the inside lane and make you get really close to the roundabout?

I cant remember how many times this has happened to me and ive been forced up the curb on the inside of the roundabout. . happens just about every week. .

And like stinky rooster said, the roundabout on armadale rd. . Happens mostly there and the one further up in forrestdale (still on armadale rd)

STAY IN YOUR LANE!!!

I'll admit that I do this, but only if there isnt anyone in sight. Seriously, who is stupid enough to cut someone off? Thats just stupidity.

Also, its a 7 demerit point fine apparently, thats the other reason I only do it when no one is around ;)

  • 5 weeks later...

Gnangara rd and Beechboro rd at peak hr, AVOID LIKE THE PLAGUE!

I've had to hit the skids for a couple of noodles that turned infront of me while heading west on gnangara. And trying to get onto gnangara from beechboro is nearly impossible

I dont know about dangerous but my picks do require a little more vigilance.

Freeway overpass at Hutton st..clowns changing lanes in the turn, then is standard nonsense down to W.A.'s old shop

Walcott and Beaufort. Every yuppie for themselves

Mirrabooka and Reid. I don't know why but there is always evidence of carnage

Right turn exit off Kwinana to Canning...make up you minds ppl, are you going into the Raffles or not?

Leach from Northlake to the Freeway anytime after 3pm on a Friday...Indy 500 without the skillz.

And any place I ride my Triumph

Mirrabooka and Reid. I don't know why but there is always evidence of carnage

I still fail to see how that's dangerous, all the accidents there are because people skip the lights. Fault of the people, not the intersection.




  • Similar Content

  • Latest Posts

    • I’m here solo don’t have any hands to help so haven’t hit it with a timing light 
    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
×
×
  • Create New...