Jump to content
SAU Community

Got My V35

FlyingEL
 Share

Recommended Posts

FlyingEL Rising Star

FlyingEL

Posted
Posted

Hi There,

Finally i got the car. Full NISMO body kit. Brembo. No Stereo, but have ordered one on the way. Any one can shed some light on how to take apart the double DIN or the center console? After I took out the gear cover, I see 2 screws at the bottom of the 2 DIN. But After they are undone, the whole console just wouldn't bunch. Any idea?

post-53067-1217233540_thumb.jpg

post-53067-1217233554_thumb.jpg

post-53067-1217233697_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/229986-got-my-v35/
Share on other sites
Chris Rogers Grand Master

Chris Rogers

Posted
Posted
Hi There,

Finally i got the car. Full NISMO body kit. Brembo. No Stereo, but have ordered one on the way. Any one can shed some light on how to take apart the double DIN or the center console? After I took out the gear cover, I see 2 screws at the bottom of the 2 DIN. But After they are undone, the whole console just wouldn't bunch. Any idea?

start on the left: remove passenger sill trim,remove passenger kick panel, remove visible screw on lower corner of glovebox,open glovebox,remove ALL screws,remove single screw on inside lower corner of glove box, remove visble screws on the pocket, remove pocket, remove gearstick cover , remove two screws. pull off ac display cover. remove screw.

not done yet.

remove 10mm bolt under hood release. pull that panel off. remove two screws that hold pocket in, remove pocket and undo cig lighter.

almost done.

grab radio assy and pull outward. the WHOLE thing comes out. disconnect EVERYTHING that is attached to it. take it out and set on table. remove 4 screws that hold the bracket in place. remove pocket. fit radio.

order a harness and antenna adpater from me and wire the whole lot up.

reassemble!

if this gets you I do this for a living and if you are brissy based I will do it for a fee.

Link to comment
https://www.sau.com.au/forums/topic/229986-got-my-v35/#findComment-4041595
Share on other sites
FlyingEL Rising Star

FlyingEL

Posted
  • Author
Posted

Thanks Chris,

That looked like a whole afternoon job, Damn. I'll try it this weekend, If fail, I'll contact you again. I'm living near caridale shopping center. I got an extra Immobilizer fitted with the car, It has a button to press after I have turn the ignition on, wait 4sec before I can start up. I'm thinking of getting rid of it, before I even start to get an extra spare key, since i got only 1 key. Maybe add in an extra Alarm/Immobiliser too.

Link to comment
https://www.sau.com.au/forums/topic/229986-got-my-v35/#findComment-4042599
Share on other sites
FlyingEL Rising Star

FlyingEL

Posted
  • Author
Posted

Hi Chris,

I got the car from a guy from gold coast under the company, MAD VEHICLE PTY LTD. I saw the car for sale in the net and he drove it down to brisbane for the viewing. The worst part was, I didn't even test drive the car when I bought it. He said he got no insurance for it yet as the car was not registered yet. I'm thinking of getting my HID done, but I'm a little confuse with my head lights unit. As you can see from the pics, My low beam is on the top (Can't see the bulb type), but my high beam is the bottom lamp on a H4? I thought H4 have high & low built in together? I have also a spot light switch on my steering column which didn't work, maybe i need spot light in the front bar.

Link to comment
https://www.sau.com.au/forums/topic/229986-got-my-v35/#findComment-4044890
Share on other sites
Frank350GT Rising Star

Frank350GT

Posted
Posted
Hi Chris,

I got the car from a guy from gold coast under the company, MAD VEHICLE PTY LTD. I saw the car for sale in the net and he drove it down to brisbane for the viewing. The worst part was, I didn't even test drive the car when I bought it. He said he got no insurance for it yet as the car was not registered yet. I'm thinking of getting my HID done, but I'm a little confuse with my head lights unit. As you can see from the pics, My low beam is on the top (Can't see the bulb type), but my high beam is the bottom lamp on a H4? I thought H4 have high & low built in together? I have also a spot light switch on my steering column which didn't work, maybe i need spot light in the front bar.

The low beam is on top usd D2R HID.

The High beam is on bottom with H4.

The drive light is share H4 with high beam. (control by the switch on light handle).

Link to comment
https://www.sau.com.au/forums/topic/229986-got-my-v35/#findComment-4045628
Share on other sites
  • 2 weeks later...
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

I'll ask a few questions:

when you pulled the passenger dash loose did you undo the yellow plug? that is the passenger airbag feed. did you unplug anything yellow?

as for resetting the light. I can but I'll have to get a scan tool first. that will also tell me what it came up for in the first place.

Link to comment
https://www.sau.com.au/forums/topic/229986-got-my-v35/#findComment-4073263
Share on other sites
FlyingEL Rising Star

FlyingEL

Posted
  • Author
Posted (edited)

I think i did undo the one at the back of the glove box only. The bigger plug. So, when can you get the scan tool? About the TV recepetion, I manage to get some channel, but it's fuzzy in black and white. How can i get a better picture? Did you see a plug in for mic at the back of the system? It's seems that the other side can't hear me when i call them using the bluetooth function. I did find a mic in the box.

I'll ask a few questions:

when you pulled the passenger dash loose did you undo the yellow plug? that is the passenger airbag feed. did you unplug anything yellow?

as for resetting the light. I can but I'll have to get a scan tool first. that will also tell me what it came up for in the first place.

Edited by FlyingEL
Link to comment
https://www.sau.com.au/forums/topic/229986-got-my-v35/#findComment-4076864
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      Torana Lx Gtr Hatch, Lots Of Pictures

      By The Bogan · Posted

      LOL, when one "money pit" is never enough Noice, and excellent work mate
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
×
×
  • Create New...