Jump to content
SAU Community

Recommended Posts

another new thread for a new arrival to the country.

After 4 months of waiting I finally saw and drove my new 99 RS stagea tonight. And omg it's so awesome lol.

I work in the new car industry, holden and mazda, and compared to anything new by them, this feels so much better to drive! its so smoothe and comfortable. Mind you I'm coming from a background of owning R31s, but yeah.

I'll get pics up asap. It's only standard, complete with moulded mudflaps, but it's mint, bar some rust under the mirrors on the doors, and a couple of bumper scrapes.

just thought i'd share my excitement and remind you all how nice stag's are. ehehe :down::P

Link to comment
https://www.sau.com.au/forums/topic/230424-woooooo/
Share on other sites

first issue. i cant go over half throttle without it jurking around, like its starving for fuel :P my importer reckons the engine bay was washed out this morning and its playing up, i hope its just water in coilpacks or something...

but anything under half throttle its awesome and smoothe

oh and it's gone through bout 1/8th tank of fuel in 35km's... seems a bit steep since ive been babying the hell outta it.

Edited by Silhouette31
Link to comment
https://www.sau.com.au/forums/topic/230424-woooooo/#findComment-4049339
Share on other sites

off topic , but how much did it set you back to get this done?

enjoy your new addiction, rust repair under 1 mirror and stonechip touch up plus leftover paint approx $500( buy the way grey is the new black :O,generally always looks clean and looks great when wet, specially at night)

Link to comment
https://www.sau.com.au/forums/topic/230424-woooooo/#findComment-4050618
Share on other sites

yeah i used to live at morphett vale, now im at dover gardens, and in a few weeks i'll be back down to woodcroft, also work in lonsdale, so i get around the south a bit... dont think i've seen ur car though? got any pics?

Link to comment
https://www.sau.com.au/forums/topic/230424-woooooo/#findComment-4051278
Share on other sites

ok rust cut out of one door and repainted... I have custom black paint with a blue sparkle/spec through it and that was $400 cash (shh).. the other side was covered by insurance due to damage caused by lane splitting motor cyclist lol

Edited by StageaGirl
Link to comment
https://www.sau.com.au/forums/topic/230424-woooooo/#findComment-4051373
Share on other sites

ok rust cut out of one door and repainted... I have custom black paint with a blue sparkle/spec through it and that was $400 cash (shh).. the other side was covered by insurance due to damage caused by lane splitting motor cyclist lol

Damn those f**king bikers! ;)

Link to comment
https://www.sau.com.au/forums/topic/230424-woooooo/#findComment-4051509
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...