Jump to content
SAU Community

Recommended Posts

hey all

prob a stupid question and been answered a million times b4 but i still wana ask.

my r33 is completely stock apart from catback exhaust, bov and K&N pod

ive read in a few places that in a stock condition, they have a dual stage boost with max at 7psi. but wen i put my foot down, on the stock boost gauge, the needle does not shift past the halfway mark, around 3.5-4 psi.

i dont really understand this so any help would be greatly appreciated

thanks

Jaye

Link to comment
https://www.sau.com.au/forums/topic/231109-stock-boost/
Share on other sites

The stock guage on your dash isn't in PSI, it's in mmHg. That +7 reading right at the top is the equivalent of about 1 BAR boost (which is around 14 PSI).

So halfway up the guage is around the 7 PSI mark, which would be correct.

That's my understanding anyway.

Another question - I remember reading somewhere that the stock boost for an R32 GTS-t is 10 PSI. Can anyone tell me if that's in fact true? It sounds high for standard boost.

Link to comment
https://www.sau.com.au/forums/topic/231109-stock-boost/#findComment-4059363
Share on other sites

The stock guage on your dash isn't in PSI, it's in mmHg. That +7 reading right at the top is the equivalent of about 1 BAR boost (which is around 14 PSI).

So halfway up the guage is around the 7 PSI mark, which would be correct.

That's my understanding anyway.

Another question - I remember reading somewhere that the stock boost for an R32 GTS-t is 10 PSI. Can anyone tell me if that's in fact true? It sounds high for standard boost.

thanx ryan. feel like a n00b, hahaha. ah well

Edited by auss13
Link to comment
https://www.sau.com.au/forums/topic/231109-stock-boost/#findComment-4059382
Share on other sites

The stock guage on your dash isn't in PSI, it's in mmHg. That +7 reading right at the top is the equivalent of about 1 BAR boost (which is around 14 PSI).

So halfway up the guage is around the 7 PSI mark, which would be correct.

That's my understanding anyway.

Another question - I remember reading somewhere that the stock boost for an R32 GTS-t is 10 PSI. Can anyone tell me if that's in fact true? It sounds high for standard boost.

yep, 10psi is the standard boost on R32s

factory boost is .7 bar thats whats on the dash

R33 factory boost is 7psi, 0.7bar is just over 10psi which is not right

Link to comment
https://www.sau.com.au/forums/topic/231109-stock-boost/#findComment-4059517
Share on other sites

Standard boost in a R33 GTS-t is 5psi untill 4500rpm then changes to 7psi to redline. This is controlled by the ECU and standard boost controller fitted to the car.

Standard boost in a R32 GTS-t is 10psi. I believe this is actuator controlled........without a standard EBC. Happy to be corrected on that.

Another question - I remember reading somewhere that the stock boost for an R32 GTS-t is 10 PSI. Can anyone tell me if that's in fact true? It sounds high for standard boost.

Not high for standard at all.

EVO's run around 19psi standard, dependant on model.

For everyones reference.

1bar = 100kPa (kilopascals) = 14.5PSI (pounds per square inch) = 750mmHg = 0.9869233 Atmosphere's

The stock R33 GTS-t gauge is actually in x100mmHg (millimeters of Mercury).

Therefore, if the highest mark is 700mmHg your halfway mark on the standard gauge is 350mmHG which is equal to 6.77PSI....rounded........ close enough to 7PSI considering the marks on the gauge are only as accurate as the smallest unit which is each quarter, off memory, and that it actually goes just over halfway when at full boost.

Link to comment
https://www.sau.com.au/forums/topic/231109-stock-boost/#findComment-4059592
Share on other sites

So that's basically an expanded version of what I said in the first reply. :) Happy to help auss13.

I didn't realise the EVOs ran such high boost from factory. I was saying that 10 was high in comparison to other Skylines as well as WRXs and such.

Link to comment
https://www.sau.com.au/forums/topic/231109-stock-boost/#findComment-4059690
Share on other sites

So that's basically an expanded version of what I said in the first reply. :thumbsup: Happy to help auss13.

I didn't realise the EVOs ran such high boost from factory. I was saying that 10 was high in comparison to other Skylines as well as WRXs and such.

WRX's Last I knew ran 14psi? newer models probably vary.

I expanded on yours because the units were incorrect.

Link to comment
https://www.sau.com.au/forums/topic/231109-stock-boost/#findComment-4059980
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...