Jump to content
SAU Community

What Front Bar Is This?

Sloane

By Sloane,
in Exterior & Interior Styling

 Share

Recommended Posts

Sloane Experienced

Sloane

Posted
Posted

This week i should have new tyres and money to spend on something else next week.

I've decided to spend some $ into cosmetic appearance of my SII R33 and that is the body work.

Ive been constantly deciding between

Do Luck Front Bar

Jun Front Bar

Top Secret Front Bar

Jun Side Skirts

Top Secret Side Skirts

400R Side Skirts.

anyway rear bar isn't important atm as i have pods to smooth out the look until i figure out that part later.

but anyway I've scrolled the internet and found these two pictures of same front bar and just want to someone to confirm its a Trial Front bar.

I really love this front bar as it doesn't have the N1 rectangular vents as most front bars seem to have.

and looks simple yet nice!

If anyone also on here that sells this front bar with any of the above mentioned side skirts could you PM pricing please

I live on gold coast also.

here are pic of front bar.

picture006ak9.jpg

Link to comment
https://www.sau.com.au/forums/topic/231908-what-front-bar-is-this/
Share on other sites
POLICE Mentor

POLICE

Posted
Posted

yeah get the trust front bar looks tough and simple

I wouldn't get the jun front bar, but that's just me

the top-secret is like a union of the 400r and gtr styles

do-luck is hot, specially the GTR version

Pattygtst Veteran

Pattygtst

Posted
Posted

What ever you do make sure if you mix your kits they match

personally i dont think trust front and do luck will work as the do luck sides stick out at the bottom quite far and go with the do luck front shape

My Advice use these options and take what you like best

Trust front or top secret front, jun sides and jun rear

Do luck front, do luck sides and jun pods or trial rear

Jun full kit, the front is not as good as the aboves but the whole package gives it a real fat look

I have do luck front and do luck sides and jun rear, i can just get away with the pods i think

You cab get do luck from dmd the image and othe parts from psi parts. And remember if you get a whole kit in one you save lots of money

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Borg Warner EFR Series Turbo's V 2.0

      By GTSBoy · Posted

      Photo of manifold showing gate location? I mean, it's 6Boost, so we probably shouldn't be worrying, but always wroth knowing what the layout is. Plumbed back to atmosphere? Or into the dump?
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Yes correct. Also, I'd avoid applying it to soft paint (however I doubt you'll ever have to deal with it in practice). So any paint that hasn't fully hardened, could be a 1k paint that never fully hardened or it could be a 2k paint that was laid down thick and hasn't yet fully hardened. 
    • kevboost7
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By kevboost7 · Posted

      Wow, i wish i found this sooner.
    • Borci88
      Borg Warner EFR Series Turbo's V 2.0

      By Borci88 · Posted

      Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • Chocolate Cheesecake.
      Infiniti Q60 Navigation Update

      By Chocolate Cheesecake. · Posted

      I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
×
×
  • Create New...