Jump to content
SAU Community

Stagea 350rx Four Can Be Complied ?

And

By And,
in Four Door Family & Wagoneers

 Share

Recommended Posts

loymclure Proficient

loymclure

Posted
Posted

"Emissions testing still needs to be done for the 3500cc variant

More information will be available if you are interested!"

not sure if you read the hole thing, but this is what i saw half way down. Seen a few people on here with shock horror storys of waiting for compliance due to emissions for 1 or 2 years

Guest

Guest

Posted
Posted

NO currently a 3.5 V6 can not be complied due too emissions, also no workshop will currently risk their own money and import a 350RX for emissions.

And being 2007 well that makes it even worse, if I was asked to comply one I would more then likely just laugh and walk off.

Guest

Guest

Posted
Posted
I don't understand why it won't pass emission, the 350Z, Murano and Maxima are ADM and all have the same engine, and the V35 350GT has been here for a few years.

It has not been tested which is why no one can currently comply them, they would more then likely pass but post 09/2003 testing is more expensive and will also need to be converted to RWD for the test.

And Collaborator

And

Posted
  • Author
Posted
Seen a few people on here with shock horror storys of waiting for compliance due to emissions for 1 or 2 years

It was exactly my point- i remember reading those stories too and i was wondering if things have changed since then.

Doesnt look like that, unfortunately...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...