Jump to content
SAU Community

Recommended Posts

Organising a group buy for a 4wd Adapter Plate for the rb30's.

What's included:

- CNC machined 5083 Billet adapter plate

- Laser cut template to drill & tap & notch the block (If you are in brisbane, i can organise to get these done on the CNC)

- Complete set of High Tensile fasteners

- Instructions for installation

We need 5 orders to get this started.

Price is $575. Usual RRP is $650.

Shipping allow $25

Group Buy ends 26th September.

cheers

Shane

cncadapter001yb6.th.jpgcncadapter002jv9.th.jpginstallingadapter002bs6.th.jpginstallingadapter003zz0.th.jpg

Link to comment
https://www.sau.com.au/forums/topic/232359-rb30-4wd-adapter-plate/
Share on other sites

Very cheap - should sell heaps

Lets hope.

very interested, how do you go about the oil pick up? is the stock one still used? is it safe to use the stock pickup in this kit?

You have to use an external pickup. If you have a look in the last pick you can see one way of doing it. (minus the massive hole)

However if you yourself would like to fabricate an internal pickup, i can have the plate changed to suit.

Everythings detailed in the instructions.

^^ coz u want more cubes are u grow more pubes

does this fit without any modification to the block? i was told you can never get a direct bolt on for this kind of adaptors

have you tried the fitment of these? cheers

can this plate be used on rb25s ? rb20s ?
thread title says RB30 4wd adapter plate

what other else do u think its for?

and yes an rb30 block will give me more cubes over my rb26

i know what it can be used for seems others dont

^^ coz u want more cubes are u grow more pubes

does this fit without any modification to the block? i was told you can never get a direct bolt on for this kind of adaptors

have you tried the fitment of these? cheers

have a read through this thread - http://www.skylinesaustralia.com/forums/Rb...on-t106224.html

also you can see in the last 2 pics in the very first post this plate is bolted to the block and a sump is bolted to the plate, showing that yes it does indeed fit.

Can this be ordered with the internal oil pick up (same as what proengines sells)?

And will the Stagea 4wd sump fit this adaptor?

Edited by inmate
1. Can this be ordered with the internal oil pick up (same as what proengines sells)?

2. And will the Stagea 4wd sump fit this adaptor?

1. At this stage no, however i'll see if i can get a local shop to fab some up - watch this space

2. I dont know, you'll have to investigate to see if the stagea's use the same sump as the gtr's.

  • 3 weeks later...
how much extra for the internal pickup?

will it come with everything to "plug n play"?

nothing extra, i'll throw it in for free :nyaanyaa:

yes, it will come with everything!

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...